Connections for panels SI-SM-ST-SL-SA
GSP-0217-E/B
The connections of SI, SM, ST, SL, SA panels between themselves, with the floor or with the ceiling are adapted to the environment cleaning and decontamination restrictions the more strict.
Link with floor
By means of an adjustable metallic belt
A coving profile fillet is available as an option to provide support for floor upsweeps (PVC or resin). On the outside face, a plinth can be installed. The adjustable metallic belt enables the level to be adjusted while providing for a 5 mm 0.02’’ undercut here and there to enable the floor to be flush with the partition.
Dimensions : 80 (-10 +30) x 50 mm
3.15’’ (-0.39’’+1.18’’) x 1.97’’
plinth
PVC or resin floor
coving section or support
belt
By U-shaped piece
Partition can be linked to the floor with a lacquered aluminium or PVC U-profile, 60 mm 2.36’’ . A plinth on one side or on each side of the partition ensures the finish.
Principle: Installation of U-profile on finished floor.
plinthe
floor covering
U
Non contractual document - Dagard reserves the right to modify its products without notice.
09-07-2019
-1-
DAGARD - Route du Stade - 23600 Boussac - FRANCE
info@dagard.com - www.dagard.com
22
Made with FlippingBook - professional solution for displaying marketing and sales documents online