6. Now apply a long strip of heat tape from the top edge to bottom edge on the pen (lengthwise). It will be over the overlapping print area, so the long strip of heat tape will be over the other smaller heat tape pieces you already applied to close the opening of the paper completely. Now trim the overlapping heat tape edges with a scissor.
7. Now slide the pen with the print into the heat shrink bag.
8. With a heat gun, shrink the heat shrink bag all over the pen. Do not hold the heat gun too close or too long on one spot, it will damage the heat bag. Hold the pen with a heat- resistant glove.
9. Bake in an oven with a shrink bag sleeve for 200°C and 5 minutes (turn the pen around after 2.5 minutes have passed and bake again for 2.5 minutes).
10. After the time is up, remove the sleeve and print from the pen.
Made with FlippingBook - professional solution for displaying marketing and sales documents online