Switchable Magnetic Welding Aids
Quick Holding Clamp Switchable
• Features ON/OFF switches • The fast & easy way to hold metal workpieces at 45°, 90° • Turn the magnet OFF or at the midpoint position when setting up, turn ON when you’re ready to work • Fast and safe set-up! • Ideal for round and square tubing, angle, and flat stock • Simple wipe clean design
Product Number
Dimensions mm 111 x 95 x 29 152 x 130 x 35
Weight kg
Pull Force* kg
Angles
QHCSS QHCSL
45°, 90° 45°, 90°
0.7 1.4
40 75
* Magnetic force is based on the longest side of magnet with 10mm thick steel.
Made with strong rare earth magnets. Fully enclosed for easier cleaning.
DOUBLE Plate Optimize magnetic force
The ON/OFF switch Mid point switch position: for alignment / easy part placement.
NOTE: Must be used for tack welding only and removed before completing weld. Avoid prolonged exposure of magnetic products to heat sources of 356ºF / 180º
4
Eclipse Magnetics Innovative Magnetic Solutions
Made with FlippingBook Digital Proposal Creator