MT-30 Webasto’s MT-30 is ideal for testing smaller applications such as battery modules, fuel stacks, partial modules and smaller components. This system provides an economical solution for a variety of testing needs while occupying a small footprint in the laboratory.
All Webasto power cycling systems are equipped with a real-time clock on the system’s control board that enables measurement of Ah and kWh during cycling.
Technical specifications
MT-30
3 Phase, 240, 380, 440 and 480 VAC
Input voltage options
130, 83, 71 and 66 A
Currency draw
60Hz (50 Hz available)
Frequency
Internal transformer
Isolation transformer
> 99%
Power factor
< 3% THD; IEEE 519 Compliant
Harmonic distortion
Manual; Remote Operation System (ROS); DCOM Driver for LabVIEW; C++ and Visual Basic; CAN
Multiple user interfaces
< 0.5Arms
Current ripple - indepdendent & parallel mode
< 15Arms
Current ripple - max ripple from load
32 - 95°F (0 - 35°C)
Operating environment - temperature
5-90% non-condensing
Operating environment - humidity
1,320 lbs (599 kg)
Weight
34 x 40 x 55 in. (87 x 102 x 140 cm)
Dimensions (L x W x H)
Operating range Configuration
Voltage (Vdc)
Current (Adc)
Power (kW)
+5 to +120
-330 to +330
-30 to +30
Channel A
+5 to +120
-170 to +170
-20 to +20
Channel B
+5 to +120
-500 to +500
-30 to +30
Parallel
Accuracy & resolution Measurement
Accuracy (±)
Resolution
125mV or 0.15% of the reading
20mV
Voltage
125mA or 0.25% of the reading
20mA
Current channel A
50mA or 0.25% of the reading
20mA
Current channel B
135mA or 0.25% of the reading
40mA
Current parallel
47
Made with FlippingBook Online newsletter