910117_eMobility Brochure

I-TS-3870-1000

100-650

5-1000

200-1000

< 1,3

Technical Data of I-TS & MI-TS Products

480 V ± 10%, 3-phase, PE, 60 Hz ± 5% *Other voltages available upon request 480 V ± 10%, 3-phase, PE, 60 Hz ± 5% *Other voltages available upon request

AC - Input voltage / AC – Input frequency AC - Input voltage / AC – Input frequency

voltage: 16 Bit ADC current: 16 Bit ADC

Measuring resolution

voltage 0.05% fs current 0.05% fs voltage: 16 Bit A DC current: 16 Bit A DC

Measuring resolution

Control accuracy

< 3% fs voltage 0.05% fs current 0.05% fs

Voltage tolerance dynamic (0 – 100 % INom in 3 ms) Control accuracy

Voltage ripple

≤ 0.1% eff. fs

Voltage tolerance dynamic (0 – 100 % INom in 3 ms)

< 3% fs

Current ripple Voltage ripple

≤ 0.1% eff. fs

≤ 0.1% eff. fs

Short circuit proof (Icw < 3 kA)

Short circuit behavior

≤ 0.1% eff. fs

Current ripple

Permissible ambient temperature

+5 to +40 °C

Short circuit behavior

Short circuit proof (Icw < 3 kA)

1K21/1M11 according to EN60721 (85% relative humidity non condensing with cabinet heating up to 95% relative humidity without condensing)

Climate class

Permissible ambient temperature

41 to 104°F (+5 to +40 °C)

Distance from ceiling min.

300 (standard, IP20)

Operating area with restricted access installation on non-flammable floor 1K21/1M11 according to EN60721 (85% relative humidity non condensing with cabinet heating up to 95% relative humidity without condensing)

Installation Climate class

IP20 according to IEC 60529 others on request 300 (standard, IP20)

Protection class Distance from ceiling min.

EN ISO 13849-1 Operating area with restricted access installation on non-flammable floor

Safety Installation

Basic standard

EN 62040

IP20 according to IEC 60529 others on request

Protection class

EN 61000-2-4 grid disturbances EN 61000-6-2 interference immunity EN 61000-6-4 interference emission EN 61800-3 Kat C2 (A1) variable – speed electrical drives EN ISO 13849-1

EMC

Safety

Subject to change without notice (tech) Basic standard

EN 62040

EN 61000-2-4 grid disturbances EN 61000-6-2 interference immunity EN 61000-6-4 interference emission EN 61800-3 Kat C2 (A1) variable – speed electrical drives

EMC

4

Subject to change without notice (tech)

Made with FlippingBook Online newsletter