Our Standard Battery System for commercial vehicles: The heart of every vehicle The Webasto Standard Battery system was developed according to the requirements in the commercial vehicle market and is therefore suitable as a traction battery for a wide range of vehicles. Scalable Standard Battery system with a system configuration of 400 V and 800 V as well as up to 630 kWh Up to 18 Standard Battery systems can be interconnected with the Vehicle Interface Gateway or up to 10 Standard Battery systems with the Vehicle Interface Box Future-proofing through further development of the battery system Flexible and easy integration into the vehicle due to vertical and horizontal installation position High-quality battery systems tested well beyond the standard ensure an exceptionally long service life thanks to integrated thermal management
Features:
Physical separation between high voltage and cooling connectors Desiccant cartridges to avoid condensation over the entire product life cycle
Integrated thermal runaway detection in each system Integrated, state-of-the-art pressure equalization Insulation measurement, high voltage interlock and contactor monitoring included in every battery pack Temperature, voltage and current of different sub-components are monitored Maintenance-free design
Technical specification of the Standard Battery system
Battery pack
Norms & standards
Dimensions (L x W x H)
37.8 x 27 x 11.9 in (960 x 686 x 302 mm) 650 lbs. (295 kg) ** per pack
Homologation: ECE R100, ECE R10 Transport: UN T38.3 (Transport of Dangerous Goods) Safety: ISO 6469, ISO 26262 (ASIL C) Environment: ISO 20653 (IP67/ IP6K9K) Vehicle Communication: CAN Bus conform to ISO 11898
Weight
Installed energy Nominal capacity Depth of discharge
35 kWh
99 Ah
Company Standards: LV 123, LV 124 EMC: ISO 11452, ISO 7637, CISPR 25
80 / 90%
Voltage range
280 V – 400 V (~350 nominal)
Energy density
~203 Wh / l, >118 Wh / kg
System requirements and the environment
Continuous use (CH / DCH) (@25 °C, SoC dependent) Peak power (CH / DCH) (10s, @25 °C, SoC dependent) Lifetime (DoD, temperature, and C-rate dependent)
50 / 56 kW
Optimized for vehicle classes M1, M2, M3, N1, N2 & N3 (EC Directive 2007/46) Designed for an ambient temperature of -30 °C to 60 °C, 3,500 meters above sea level and 0 – 100 % humidity
113 / 112 kW
Up to 3.000 cycles*
Calendric lifetime
Up to 8 years
Volume flow
10 l/min.
Pressure loss
< 50 mbar
Cell type
prismatic NMC
Operating temperature
-22 °F to 140 °F 3,500 meters above sea level 0 - 100% humidity
9
Made with FlippingBook Online newsletter