SPRINT CAR COMPONENTS
Top Wing Trees Wing trees have an “X” design for lateral able in 16" and 18" tall versions, each tree is adjustable and will extend up to 6" with adjust- ment holes located at 1" increments. 16" trees are ideal for X wedge cars to keep the back of and horizontal strength. Avail-
Nose Wing Wall Mount Brackets ALL12214 Brackets attach to the side of trailer wall to hold a spare sprint car front nose wing safely in place. Powder coated aluminum brackets feature slotted arms which are fully adjustable to accommodate a variety of nose wing shapes and sizes. Sold in pairs with retention straps to keep wing secure. Wing Caps Prevent rocks and debris from damaging the leading edge of many popular sprint car wings with a protective cap.
ALL55130 ALL55132
ALL55131 ALL55133
the top wing lower while providing optimal top wing tilt at high speed
tracks. 4130 chrome moly 3/4" x .060" tube construction. Wing trees are 26" wide at the top and have a min/max bot- tom width of 25-3/4" to 26-1/2". Adjuster pins not included. Part No. Height Finish ALL55130 16" (Extends To 22") Black ALL55131 16" (Extends To 22") Plated ALL55132 18" (Extends To 24") Black ALL55133 18" (Extends To 24") Plated Part No. Description Related Parts ALL17028 Titanium Adjuster Pins, (1-Pair) ALL55134 Top Wing Tree Slider, Black ALL55135 Top Wing Tree Slider, Plated Titanium Top Wing Pin Kit ALL17028 Kit includes two 1/4" x 1" pins with locking clips for adjusting wing tree heights. Top Wing Titanium Posts ALL55128 7/8"
Part No.
Description
ALL23220 ALL23222 ALL23221 ALL23223
Top Wing Cap, 60" Long, High Impact Plastic Front Wing Cap, 36" Long, High Impact Plastic
Top Wing, 60" Long, Carbon Fiber Front Wing, 36" Long, Carbon Fiber
Manual Wing Adjuster ALL48004
Use a manual adjuster for sprint car top wings when rules do not permit hydraulic cylinders. Slider includes 3/8"-24 steel thread rod ends and is adjustable from 20" to 32" cen- ter-to-center in 1" increments with locking pin. Weight is less than 1 lb. Hydraulic Wing Cylinders Strong hydraulic wing cylinders have an aluminum body which houses a steel piston and pushrod assembly. Available in 10" and 12" length.
Part No.
Description
Top posts are 12" long overall and have >xɣȸ`>iÌiÀ/L>ÀÌwÌ>Ü`iÀ>}i of wings. Position of T-bar is set at 75 degrees providing additional wing angle. Posts are built from strong 1" x .150" wall titanium tube construction, sold as a pair.
ALL48000 ALL48002
10"
12" Titanium Studs For Wing Cylinders Single stud used to mount the wing cylinder to the chassis or wing tree. Stud has 3/8"-24 threads for mounting most cylinders. Mount- ing nuts not included. Sold each. Part No. Description
ALL17036
ALL17038
ALL17036 5/16"-24 x 3/8"-24 x 1.640" Stud ALL17038 3/8"-24 x 3/8"-24 x 1.600" Stud Wing Line Kit ALL48006 Kit includes lightweight, coated, stain- less steel braided lines and aluminum wÌÌ}ÃÌ i«Ã«vÞ«ÕL}v KSE Gen2 steering gear and wing cylinder. Kit includes (2) #4 slider lines (22" long and 36" long), (2) #4 pres-
sure and return lines (18" long), (4) 45 deg 4AN to 1/8"NPT Û>ÛiwÌÌ}Ã]Ó®ä`i}{č Ì£Én¸ */VÞ`iÀwÌÌ}Ã>` Ó® } yÜÎ", Ì{č wÌÌ}ð
CARSON MACEDO
JIM DENHAMER
2019 OPEN WHEEL PARTS AND ACCESSORIES
8
Made with FlippingBook flipbook maker