Residual Pressure Valve CNC870-2 2-pound residual pressure valve. Throttle Cables And Accessories Supreme cables are made for tight radius applications. Avail- able in 4', 5', 6', 7', 8', 10', or 12' lengths. Part No. Description CNC820-* Supreme Throttle Cable (Specify Length) CNC842 3/16" Ball Joint, Quick Release Cable End CNC843 3/16" Rod End, Cable End CNC845 Clevis and Pin, Cable End * Specify length 3', 4', 5', 6', 7', 8', 9', 10', or 12' when ordering. Durable spacers are machined from billet >ÕÕÌwÌ iÛÞ and Ford water pumps. Fasteners and adapter bushing for 5/8" and 3/4" water pump shafts are included. Part No. Description CAN75-610 1" Fan Spacer CAN75-615 1-1/2" Fan Spacer CAN75-620 2" Fan Spacer CAN75-625 2-1/2" Fan Spacer CAN75-630 3" Fan Spacer CNC842 CAN75-610 CAN75-625 SB Chevy Pulley Shim Kits Compensate for variances in pulleys for perfect belt alignment. Each kit in- cludes aluminum shims in thicknesses of 1/16", 1/8", and 3/16". Part No. Description CAN74-900 Crank Pulley Shim Kit CAN74-910 Water Pump Pulley Shim Kit Fan Spacers Ã]iÌV°wÌÌi`ÜÌ À`i`ð «>ÌLiÜÌ xɣȸ]ÎÉn¸] 7/16", 1/2", 5/8", and 3/4" rod ends, linkages up to 36" long, or torque absorbers with up to 5-1/2" diameter springs. Aluminum Clamp-On Accessory Mounts Accessory mounts clamp to roll bar or chassis tubing for quick mounting of mirrors, helmet hooks, etc. Brackets feature a 1/4"-20 tapped hole. Part No. Description COL900-400 Accessory Mount, 1-1/4" COL900-401 Accessory Mount, 1-1/2" COL900-403 Accessory Mount, 1-3/4" Rear View Mirror With Mounting Bracket COL7328 >À}ix¸`>iÌiÀ]y>Ìv>ViÀÀÀ}ÛiëÌ> side and rear vision. Can also be used on carts and ATV pushers. COL900-400 “Rod Ruler” COL21790 Quickly measure tie rods, trailing arms, third
Balance Bar Adjuster Adjust the brake balance bar on dual master cylinder brake systems from the driver seat. By turning the knob, front/rear brake pressure can be adjusted for changing track conditions. Part No. Description CNC830-2 With 2' Cable CNC830-3 With 3' Cable CNC830-5 With 5' Cable Clevis And Pin CNC1457B Õi>`âi`Ài«>ViiÌViÛÃ>ÃÃiLÞwÌÃ> pedal assemblies. Louvered and screen-type, stamped steel trays keep oil off of the rotating assembly and in the sump where it belongs. Available for most applications. Mounting kit must be purchased separately. Part No. Description Windage Trays CAN20-908 SB Chevy Pro Plus Louvered Windage Tray CAN20-911 SB Chevy Full Length Windage Tray Screen, LH Dipstick Windage Tray Mounting Kits CAN20-920 Mounting Kit For CAN20-911 CAN20-921 Mounting Kit For CAN20-908 Oil Pan Accessories Inspection Plug CAN20-888 A 1" NPT bushing and plug that can be welded into a 1-1/2" diameter hole. For use where an inspection plug is required to verify the use of stock connecting rods. Windage Trays
CAN20-908
SB Chevy 1:1 Aluminum Pulleys Double-groove billet aluminum pulleys are hard coat anod- ized for durability and sized to deliver a 1:1 drive ratio. Part No. Description COLDS-364 5-7/8" Dia. Crank Pulley COLDS-364-2L 5-7/8" Dia. Crank Pulley, Corvette Pump COLDS-364-B Crank Pulley Alignment Boss COLDS-380 Pulley, Upper, 1:1 Ratio, 5/8" Bore COLDS-380-3 5-7/8" Dia. Water Pump Pulley, 3/4" Pilot COL9325 V-Belt For 1:1 Pulleys
SBC Harmonic Balancer COL25877 iÃ}i`ëiVwV>ÞvÀ-> V iÛÞ crate motors, this 8 inch, 5.65 lbs. lightweight steel balancer features a rubber liner with timing marks on the outside diameter.
119
2019 OPEN WHEEL PARTS AND ACCESSORIES
Made with FlippingBook flipbook maker