Open Wheel Parts & Accessories

SPRINT CAR COMPONENTS

Titanium Pinch Bolt Kit For Torsion Arms And Pitman Arms ALL17032

Quick Change Cover Nuts ALL72060 Aluminum nuts are pre-drilled for safety wire to prevent nuts from working loose and causing leaks.

ˆÌˆ˜VÕ`iÃwÛiLœÌÃ̜Ài«>ViÃÌ>˜`>À`ÎÉn¸‡Ó{Ý£‡ÇÉn¸ hardware found in most torsion and pitman arms. Bolt kit weighs less than 90 grams. Titanium Bolt Kit For Torsion Arm Stop Adjuster ALL17034 Kit includes four 7/16"-20 stop adjuster bolts with 9/16" heads to replace or upgrade standard hardware found in tor- sion arm stops. Kit weighs less than 80 grams.

Nuts have 3/8"-16 threads. Package of 10. Sprint Wheel Cover Bolt Kits Kit includes 5/16"-28 bolts, 1-3/8" spread aluminum insert plates with steel threaded inserts, e-clips to keep bolts on the wheel cover and rivets. Package of 3. Part No. Description ALL44265 Stainless Steel ALL44266 Titanium

Rapid Install “Quick Change Gear Cover” The ultimate quick change gear cover! Speed up gear changes and never again waste time due to cover nuts! Unique design holds nuts directly on the 6061-T6 billet aluminum cover. Part No.

Quick Change Cover Gaskets Part No. Description ALL72050 Paper ALL72052 Thick With Steel Core

ALL72052

Description

ALL72064 ALL72065 ALL72066

Frankland And Winters, Standard Bearing Frankland And Winters, Large Bearing

DMI Bulldog Rear End

Related Components ALL72068

Cover Nuts, Black Aluminum, 2-Pack Cover Nut Retainers With Allen Bolt, 2-Pack

ALL72069

BRAKES

Master Cylinder Remote Reservoirs High-impact plastic remote reservoirs simplify brake bleeding, especially when master cylinder is mounted low in the chassis. Available with single or dual outlet and may be connected to master cylinder with a 5/16" hose. Part No. Description ALL42045 Single Outlet ALL42046 Dual Outlet Brake Shut-Off Valve ALL48010 Valve has 1/8"NPT inlet and outlet and is rated >ÌÓ]äää*-°1Ãi菏ÃÌ>Àčxä£ÓäwÌ̈˜}vœÀ Îɣȸˆ˜ÛiÀÌi`y>ÀiLÀ>Žiˆ˜i°ˆ“i˜Ãˆœ˜Ã\ 1/2" W x 1-3/4" L x 1-9/16" H. Proportioning Valve ALL48025 Adjust front-to-rear brake bias with the twist of a knob. Provides up to 57% reduction. Fitting ports are 1/8"NPT. Valve includes ÌܜwÌ̈˜}Ã̜>`>«Ì̜Îɣȸ brake line. 1" long, 1-3/4" wide and 3-5/16" tall.

ALL41048

Residual Check Valves ,iÈ`Õ>V…iVŽÛ>ÛiÃ…œ`> small amount of pressure in the brake system to keep the brake system functioning properly ܅ˆi…i«ˆ˜}̜“>ˆ˜Ì>ˆ˜>wÀ“ pedal. Maintaining system pres-

ALL41049

ÃÕÀi«ÀiÛi˜ÌÃyՈ`vÀœ“ÀiÌÕÀ˜ˆ˜}̜̅i“>ÃÌiÀVޏˆ˜`iÀ܅i˜ the master cylinder is positioned lower than or close to the same height as the calipers or wheel cylinders. Proper system pressure also keeps piston and wheel cylinder seals expanded creating a positive seal and brake pads seated against the ÀœÌœÀ°6>ÛiȘVÕ`iÌܜÎɣȸˆ˜ÛiÀÌi`y>ÀiwÌ̈˜}ð Part No. Description ALL41048 2 Lb. For Disc Brakes ALL41049 10 Lb. For Drum Brakes Brake Bias Adjusters ALL42072 Adjust brake bias from the

driver seat to compensate for changing track conditions. Ad- justers mount to balance bars with 3/8"-24 threads. Comes with 5 ft. long cable-style adjuster.

2019 OPEN WHEEL PARTS AND ACCESSORIES

15

Made with FlippingBook flipbook maker