Oil Pressure Gauge Fittings -«iV>wÌÌ}Ã]`iÃ}i`LÞ >À ÃiÀ]}iÌÃÌ i«Àià - sure gauge line up where it is more accessible. Fitting is 1/8" NPT on engine end, while the gauge connection is -4AN.
Inline Ball Valves CNC-machined from billet alumi- num, then anodized for durability, Peterson’s inline-mounted ball valves have PTFE seals and hard- coated aluminum balls and bodies
for long life and resistance to corrosion from racing fuel. Valves are available with small bodies in -6AN and -8AN sizes and large bodies in -10AN and -12AN sizes. A panel-mount ball valve (-6AN) is also available and is ideal for use as a dash mounted fuel shutoff. Part No. Description PTR09-0900 Small Body Valve -6AN PTR09-0910 Panel Mount Ball Valve -6AN Male Fittings PTR09-0923 Ball Valve, -8AN Male To -8AN Female PTR09-0960 Large Body Valve -12AN x -12AN PTFE Engine Seals >À`Ìw`*/ i}iÃi>Ã>ÃÃÕÀi>ÝÕÛ>VÕÕ levels for engines with dry sump oil systems. Seals are manu- v>VÌÕÀi`LÞ/ " «iÌÌ iÛi«iÌ° Part No. Description PTRSM86410 Rear Main Seal, SB Chevy 400 PTRSM86586 Jesel Front Cover, Chevy Cam Seal PTRSM86587 Jesel Front Cover, SB Chevy Crank Seal PTRSM86625 Rear Main Seal, SB Chevy 350 PTRSM86990 Front Crank Seal, SB Chevy SB Chevy Manifold End Rail Spacers Fill the gap between the manifold and
PTR15-1040
Description PTR15-1041
Part No.
PTR15-1040 PTR15-1041
Oil Pressure Gauge Fitting, 90° Oil Pressure Gauge Fitting, Straight
SB Chevy Lifter Valley Riser Tubes PTR15-1050 Tubes install in the lifter drain-back holes to prevent oil drain back while still allowing Ì ii}i̺LÀi>Ì i»°ÇäVÀwÌiÀÃVÀiiÃÌ i tube opening protect from debris. Installation requires that the lifter drain back holes be tapped to 1/4" NPT. Hex top is ɣȸ>`LÌÌãÉ{¸ */°-iÌvi} Ì° Fuel Fittings >V i`vÀ>ÕÕ>`>`âi`]wÌ - tings have large bores and are radiused on the iÌÃ`iÃvÀ«ÌÕyÜ° Part No. Description PTR15-1002 Fuel Regulator, -10AN x -8AN Port
PTR15-1003 PTR15-1004
Fuel Regulator, -6AN x -6AN Port Fuel Regulator, -8AN x -8AN Port
the lifter valley end rails when using raised port cylinder heads on small block Chevy engines. Sold in pairs, spac- ers include four 3/16" roll pins for reten- tion. Drilling of the block is required for installation. Part No.
Dry Sump Oil Tank Mounting Brackets
Mounting brackets are machined from billet aluminum and include EPDM rubber-lined stain- less steel straps. Sold in pairs. Part No. Description PTR08-0100 For 6" Dia. Tanks PTR08-0101 For 9" Dia. Tanks Dry Sump Tank Fittings č`âi`>ÕÕwÌÌ}ÃV«iÌiÌ iÃÌ>>Ìv>Þ Peterson dry sump tank. Part No. Description
Description
PTR09-1060 PTR09-1061 PTR09-1062 PTR09-1063
Spacer Set, .125" Thick Spacer Set, .187" Thick Spacer Set, .250" Thick Spacer Set, .375" Thick
Oil Tank Heaters Pre-heating of dry or wet sump sys- tems on a race engine ensures good lubrication upon initial start-up. Immer- sion-style heater does a great job of pre-heating and only requires welding a threaded bung into the tank. Wrap-around styles can be glued to the outside of the tank or pan. Part No. Description PTR08-0300 300 Watt Immersion Style, 110 Volt With Detachable Cord Set, Steel And Aluminum 1/2" NPT Weld Bungs PTR08-0301 300 Watt Wrap Around Pad, 2" x 15", 110 Volt With Detachable Cord Set, Attaches With Hi-Temp RTV Silicone PTR08-0302 400 Watt Wrap Around Pad, 4" x 10", 110 Volt With Detachable Cord Set, Attaches With Hi-Temp RTV Silicone Lightweight Cap And
PTR08-0501 -10AN Hose x -12AN Port PTR08-0502 -12AN Hose x -12AN Port PTR08-0503 -16AN Hose x -12AN Port PTR08-0504 -6AN Port Plug (Tank Drain) PTR08-0505 -12AN Port Plug (Tank Drain) PTR08-0506 O-Ring Kit, -12AN (5 Per Pack) Remote Oil Filter Mounts
Manufactured from billet 6061-T6 alumi- num for rigidity, remote mounts are of- viÀi`Ì>VVi«Ì««Õ>ÀwÌiÀð ÕÌà include -12AN inlet and outlet ports, and a £Én¸ */}>Õ}i«ÀÌ°-`V«iÌiÜÌ wÌÌ}ð Part No. Description PTR09-1301
Bung Assembly PTR08-0611 Billet aluminum 1-7/16" cap and bung assembly is ideal when fabricating custom tanks. Cap is red anodized.
Accepts 13/16" Thread Chevrolet Filter, -10AN Fittings Accepts 13/16" Thread Chevrolet Filter, -12AN Fittings Accepts 3/4" Thread Ford Filter, -12AN Fittings
PTR09-1302 PTR09-1312
324 2019 OPEN WHEEL PARTS AND ACCESSORIES
Made with FlippingBook flipbook maker