Direct Mount Hubs SND1015-15F-9 Forged aluminum hubs directly replace front wheel centers on Superlite-type spindles. Hubs are sold in pairs with Timken bearings and races, seals, dust covers with O-rings, studs, and lug nuts. Part No. Description Replacement Components SNDS113 Lug Nut, 5/8"-11, Each SNDS132 Bearing And Seal Kit, Pair Shortie Spindles SNDS501
Racing Wheels CNC, cold-spun wheel halves are cold-formed over a two-stage mandrel and heat-treated twice resulting in a «iÀviVÌÜ ii° i>`VÃ>ÀiLiÌ]Ì
formed or welded. Six-pin centers are machined from billet for maximum weight savings with splined centers are cast from magnesium. Halves are polished and lock ring is anodized. Include mud covers. 3" SND15-156-SI1 Splined Wheel, Inside Beadlock #1 15" x 15" 6" SND15-176-S02 Splined Wheel, Outside Beadlock #2 15" x 17" 6" Wheel Accessories Part No. Description Size Back Spacing SND15-083-DN Direct Mount Wheel, No Beadlock 15" x 8"
Sander style aluminum spindles have tubular spindle pins. Sold individually with spindle nuts, locking pins, and washers. Use with SND1006 front hubs. Part No. Description Replacement Components SNDS512 Spindle Nut And Washer Kit, Pair SNDS514 King Pin Bushing, Sold Each(Must Be Honed After Installation) Tubular King Pins And Caps Part No. Description SNDS167-1 Sprint Tubular King Pin, .859" Dia., Fits SNDS500 Or SNDS501 Spindles With SNDS167C Cap SNDS167C Locking Cap, 1/2"-20 Threads Rear Cam Drive Components Part No. Description SNDS202 Cam Drive, Std. RH 9/16"-18 Threads, 1" Long Body, 1-5/8" Overall Length SNDS203 2.100" OD Cam Seal, Includes Plate And Seal For SB Chevy Birdcage Clevis Part No. Description
Part No.
Description
SND1-08
15" x 8" Wheel Half, No Beadlock Magnesium Splined Rear Wheel Center Forged Aluminum Splined Rear Wheel Center 15" 16-Bolt Beadlock Ring, #1 Type, No Mud Cover 15" 16-Bolt Beadlock Ring, #2 Type, No Mud Cover Mud Cover, #2 Type, With Quick Fastener Button
SND1020-15 SND1020-15F SND15-010 SND15-020 SND15-022
U-Joint Assemblies U-joint assembly eliminates over two pounds of rotating weight. Part No. Description SNDS304A Aluminum U-Joint Assembly SNDS304AS Aluminum To Stell U-Joint Assembly Front Brake Hat SND1055 } ÌÜi} Ì>ÕÕ >ÌwÌãӰ£n¸` - ameter vented rotor. Should be used with SNDS517 mounting stands, which mount to the back side of the SND1006 hubs with 8 x 7.62" bolt pattern rotor. Front Rotor Mount Kit SNDS517 ÌVÕ`iÃÎÃÌ>`Ã>`Îy>Ì i>`LÌÃ] both with 1/2"-20 threads. Front Mount Caliper Bracket SND1054-2 Caliper bracket is engineered for use with Sander SNDS501 or 2000 series spindles and accepts 4-piston calipers with 5.25" mounting. Sold each.
Steel W-Link Clevis, 1/2" Shank, 3/8" Hole For Pin, For Birdcages With A 1/2" Clevis Hole Steel W-Link Clevis, 5/8" Shank, 3/8" Hole For Pin, For Birdcages With A 5/8" Clevis Hole
SNDS620-1
SNDS620
Tubular Torsion Bars Tubular torsion bars cut approximately 3 pounds and react more quickly. All have 1-1/8" x 48-spline with 1" bushings and a 3/4" through-hole.
Part No.
Description
SNDS155-30-1000 SNDS155-30-1025
1-1/8" Torsion Bar, 30" Long, 1.000" Bar Dia. 1-1/8" Torsion Bar, 30" Long, 1.025" Bar Dia.
Tubular Driveshafts SNDS164-16-30 Super-strong, lightweight driveshafts have 16-10 splines and are available in 30" long. Torsion Bar Bushings Part No. Description
SNDS148B Bronze, Fits 1-1/2" Tube With .120" Wall SNDS149 Aluminum, Fits 1-1/2" Tube With .095" Wall SNDS149B Bronze, Fits 1-1/2" Tube With .095" Wall
380 2019 OPEN WHEEL PARTS AND ACCESSORIES
Made with FlippingBook flipbook maker