SUSPENSION
Shock Shims Uniquely designed shock shims are placed directly onto the shock shaft to ëvÞwiÌÕ}vÌ iV >ÃÃÃÜÌ - out disassembling the shock or even removing the shock from the chas- sis. Kits include a variety of shim designs and sizes for convenient tuning and set-up.
Shock Travel Indicator Kits Check compression and re- bound travel of coil-over shocks at a glance. Clamp aluminum
ALL60095 ALL60094 bracket portion of the kit directly to the coil-over sleeve or shock body and attach the other end to the existing shock eye bolt or un- der spring cup. May be used with most coil-over and non-coil-over shocks. Clamp is included. Part No. Description ALL60094 Kit For Use With 2-1/2" Spring ALL60095 Kit For Use With 3" Barrel Or 5" Springs Aluminum Backing Washer ALL64326 Aluminum washer is designed for use with bump stop pucks, as a backer washer or many other uses. Washer has a 2-1/4" O.D., 5/8" I.D. and is 3/16" thick. Bump Stop Shims Place within the bump stop Shock Bump Rubbers V>Ã >«i`LÕ«ÀÕLLiÀÃwÌÃÌ shock shafts up to 16mm to limit shock travel. Bump rubbers are 2-3/8" tall and have a 2" O.D. base. A letter designation is molded in the bottom to identify compound. Part No. Description ALL64500 Soft (40 Grams) ALL64501 Medium (50 Grams) ALL64502 Hard (55 Grams) Aluminum Flat Spacers Flat spacers are great for shimming and add- ing additional clearance to brackets for brake calipers, power steering, alternators, dry sump pumps or just about anything to help with alignment issues. Package of 2. Thickness 3/8" I.D. (11/16" O.D.) 1/2" I.D. (1" O.D.) 1/8" ALL18740 ALL18760 1/4" ALL18742 ALL18762 3/8" ALL18744 ALL18764 1/2" ALL18746 ALL18766 ALL64324 stack to limit suspension travel. 2" O.D. shims work with most bump stop bushings. Part No. Description ALL64324 ALL64325 1/16" Shim 1/8" Shim
ALL64404
Starter Kit
Standard Kit
Deluxe Kit
Size
14mm ALL64400 ALL64402 ALL64404 16mm ALL64440 ALL64442 ALL64444 STARTER KIT
Includes: U-Shaped Shims 1/16" (4 pcs.), 1/8" (4 pcs.) and 3/8" (2 pcs.); Semi-Solid Shims 1/16" (4 pcs.) and 1/8" (4 pcs.). STANDARD KIT Includes: U-Shaped Shims 1/16" (12 pcs.), 1/8" (12 pcs.) and 3/8" (6 pcs.); Semi-Solid Shims 1/16" (12 pcs.) and 1/8" (12 pcs.); 2-Piece Collar Shims 1/2" (2 pcs.), 3/4" (2 pcs.) and 1" (2 pcs.); Storage Case. DELUXE KIT Includes: U-Shaped Shims 1/16" (12 pcs.), 1/8" (24 pcs.) and 3/8" (10 pcs.); Semi-Solid Shims 1/16" (12 pcs.) and 1/8" (24 pcs.); 2-Piece Collar Shims 1/2" (6 pcs.), 3/4" (6 pcs.) and 1" (6 pcs.); Storage Case. Shock Shim Components U-SHAPED SHIMS Designed for quick removal and installation into tight stacks and locations where twisting the shim into the stack is not an option or when Ì iV>ÀÃÌ i}ÀÕ`° ÞÕÃi`vÀwi tuning the suspension. SEMI-SOLID SHIMS Designed for quick removal providing a secure installation that will not fall out yet requires 3/4" of space to install or remove. Typically installed when the vehicle is off the ground. Commonly ÕÃi`vÀwiÌÕ}Ì iÃÕëið 2-PIECE COLLAR SHIMS Designed to attach around the shaft of the shock and secure in place with a zip tie. Com- monly used during initial set-up or to take up a large amount of travel. Description 2-Pack 10-Pack ALL64420 25-Pack ALL64416 ALL64412
ALL64325
14mm (.550")
U-Shaped Shim 1/16" U-Shaped Shim 1/8" U-Shaped Shim 3/8" Semi-Solid Shim 1/16" Semi-Solid Shim 1/8"
— ALL64410 — ALL64412 — ALL64414 — ALL64416 — ALL64418
ALL64410-25 ALL64412-25 ALL64414-25 ALL64416-25 ALL64418-25
2-Piece Collar Shim Kit 1/2" ALL64420 ALL64420-10 2-Piece Collar Shim Kit 3/4" ALL64422 ALL64422-10 2-Piece Collar Shim Kit 1" ALL64424 ALL64424-10
— — —
16mm (.630")
U-Shaped Shim 1/16" U-Shaped Shim 1/8" U-Shaped Shim 3/8" Semi-Solid Shim 1/16" Semi-Solid Shim 1/8"
— ALL64450 — ALL64452 — ALL64454 — ALL64456 — ALL64458
ALL64450-25 ALL64452-25 ALL64454-25 ALL64456-25 ALL64458-25
2-Piece Collar Shim Kit 1/2" ALL64460 ALL64460-10 2-Piece Collar Shim Kit 3/4" ALL64462 ALL64462-10 2-Piece Collar Shim Kit 1" ALL64464 ALL64464-10
— — —
2019 OPEN WHEEL PARTS AND ACCESSORIES
50
Made with FlippingBook flipbook maker