SPRINT CAR COMPONENTS
Polished Round Dry Sump Tanks Aluminum 6" tanks feature a
Heating Pads High temperature silicone heating pads externally preheat oil in wet sump
} Þ«Ã i`wà >`>V - pletely removable top to enable thorough cleaning. Three internal L>vyiÃ>Àiv>ÃÌii`ÌÌ iÌ« for easy removal and cleaning. All tanks have two 3/8"NPT female ports on the top cover for vent lines or return lines and a 3/8" female NPT bottom port for easy draining. Tanks are offered in two versions, an AN version ÜÌ >£Èč ÀiÌÕÀwÌÌ}>`> ÎÉ{¸ */vi>iÃÕ««ÞwÌÌ}À
ALL76422
oil pans, dry sump tanks and automatic transmission pans re- ducing overall warm up time and improving lubrication during initial start up. 3" cord, 120-volt operation. Part No. Description ALL76420 2"x15", Self Adhesive Pad, 200 W ALL76422 5"x7", Self Adhesive Pad, 375 W ALL76424 6"x12", Velcro Strapped Pad For 6" O.D. Tanks, 435W WARNING! Do not plug heater in without being installed on tank or metallic surface to absorb heat. Element heats up quickly and damage will result. Immersion Heaters 5/8" diameter stainless steel sleeve inserts into pan or tank and secures with a welded on 1/2" NPT brass screw-in wÌÌ}°£ÓäÛÌ«iÀ>Ì° Part No. Description ALL76415 4-3/4" Long Heater Element w/3' Long Cord, 400 W ALL76416 7-1/2" Long Heater Element w/12" Long Cord, 250 W WARNING! Do not plug heater in without being installed in tank and sub- mersed in liquid, element heats up quickly and damage will result. Immersion style heater preheats oil in wet sump oil pan or dry sump tanks to reduce overall warm up time and improve lubrication during initial start up.
ALL36101
ALL36095
an NPT version with two 3/4"NPT female ports for return and one 3/4"NPT female supply port. Mounting brackets must be purchased separately. Part No. Description Tank With AN Fittings ALL36101 16" Tall, 6 Qts.* ALL36102 18" Tall, 7 Qts.* Replacement Parts ALL36124 Cap * Capacity listed is fluid filled to approximately 4" from top of tank. Note: 1" of tank height equals approximately 1/2 quart of fluid. Round Dry Sump Tank Mounting Kit ALL36094 Mounting with front motor plate on left side of engine, bracket angles outward slightly for extra clearance, and its non- slip material protects the tank. Mounting straps and tank protectors are included. Sprint Car Dry Sump Tank Mounting Brackets ALL36124
Sprint Wash Plug Set Aluminum plugs have O-rings for a water tight seal and will keep dirt out of injectors while cleaning sprint car. Four- piece set comes with a nylon storage pouch.
ALL26072
Mounting brackets are designed to mount 6" diameter tanks to the left front corner of standard small block Chevy style engines. Commonly mounted with front motor mount
Part No.
Size
Wash Plug Dia.
Stack Dia.
Kinsler
ALL36092
ALL26072 ALL26073 ALL26074 ALL26075 ALL26076 ALL26033 ALL26035 ALL26036 ALL26038
2-1/4"
2.328" 2.762" 2.848" 2.921" 2.973" 2.632" 2.885" 2.973" 3.073"
2.335" 2.790" 2.875" 2.950"
2-11/16"
2-3/4"
brackets the upper bracket utilizes the water pump mounting holes and the lower bracket fastens to the early front engine mount mounting holes. Part No. Description ALL36092 Upper Tank Mount ALL36093 Lower Tank Mount
2-13/16"
2.90"
3.00"
Engler
2-1/2"
2.650" 2.905"
2-13/16"
2.90"
3.00" 3.10"
3"
Hilborn
ALL26032
2-7/16"
2.483"
2.50"
Fuel Pressure Gauge ALL40330
Compact Electric Fuel Pump ALL40320 } yÜ]Ü«ÀiÃÃÕÀiiiVÌÀV fuel pump has 5/16" inlet/outlet >`yÜãn*J{°ä*-]x°x PSI maximum. Popular mini-sprint pump includes a rubber-padded mounting bracket and two heavy duty hose V>«Ã°,>Ìi`£ÓÛÌÉx>«Ã°
Fuel pressure indicator gauge allows pre-adjustment of the high speed, sec- ondary and main valve opening pressures using a compressed air source. Gauge can be mounted directly to the wall or tool box. 4-1/2" diameter dial has a 0-160 PSI range.
2019 OPEN WHEEL PARTS AND ACCESSORIES
5
Made with FlippingBook flipbook maker