PSS ACCESSORIES For All PSS Shaft Seal Models
T-KIT PYI offers T-Kits to help facilitate the installation of the PSS Shaft Seal. These T-Kits enable the installer to tee into the raw water discharge hose and plumb water to the hose barb fitting of the PSS Shaft Seal. Some examples of water pick-up points are: between the heat exchanger and riser, between oil cooler and heat exchanger and between the water pump and oil cooler.
INSIDE HOSE DIAMETER
PART #
07-KIT-012 07-KIT-034 07-KIT-100 07-KIT-114 07-KIT-112
½" ¾"
1"
1¼" 1½"
Includes
• T-Fitting • 6’ of ³⁄ ⁸ ” hose • Hose clamps
REMINDER Measure the inside diameter of the cooling hose which you intend to tee off from before ordering.
Correct T-Kit installation
FLOW INDICATOR PYI offers an Inline Flow Indicator. This paddle wheel/sight flow indicator will allow the boat owner to quickly confirm positive water flow running to the seal/through the line. When installed in-line, the paddle will spin if positive water flow is present and will ensure the seal is getting the necessary water to keep it lubricated. The flow indicator is fitted with 3/8” hose barbs.
Includes
• Flow indicator • 3/8” hose barbs - 2 qty. • 316L hose clamps - 4 qty. • Clamp Jackets (Hose clamp tail covers)
Correct Flow Indicator installation.
HY-VENT PYI is now offering the Taco Hy-vent for sailboats and other low speed watercrafts. This nickel plated brass vent is to be installed at the end of the vent line. It is a float style vent/valve that will allow air out while restricting water flow in that direction. If any water or backflow is to come up the line from the seal, the vent will close off, keeping the water from entering the engine room. Once the water flow subsides, the float will open allowing air to freely vent. This product is a great option to maintain an air free system and ensure the engine room stays dry in the event of back flow; from prop wash, unusual external pressure, backing down, etc.
Includes
• Hy-Vent • 3/8” hose barb - 1 qty. • 316L hose clamps - 2 qty. • Clamp Jackets (Hose clamp tail covers)
Correct Hy-Vent installation.
TO ORDER VISIT WWW.PYIINC.COM OR CALL 425-355-3669
11
| PSS SHAFT SEAL
Made with FlippingBook HTML5