COMPRESSION MOUNTS R&D Compression Mounts provide a competitive low height mount with basic deflection and vibration control.
5.13"
5/8" Stud
4"
5/8" UNF
Min. Height With Adjustment Nut (A)
Capacity / Mount
Mount Pre-Loaded
Height (B)
Part #
Deflection
800-003 100 - 180 lbs
0.06"
0.09"
2.3"
4.58"
B
3"
800-004 160 - 370 lbs
0.06"
0.09"
2.3"
4.58"
800-005 320 - 500 lbs
0.06"
0.09"
2.3"
4.58"
A
This is a low height mount with minimum deflection.
0.51"
5.13"
5/8" Stud
4"
5/8" UNF
Min. Height With Adjustment Nut (A)
Height (B)
Part # Capacity / Mount
Deflection
800-033
190 lbs
0.065"
2.3"
5.37"
B
800-036
300 lbs
0.065"
2.3"
5.37"
2.81"
A
This mounting is a competitive, low height medium capacity mount giving good engine control.
0.51"
RECTANGULAR SHEAR MOUNTS R&D Marine Rectangular Shear Mountings offer low height with the best combination of stiffness. Soft vertically and at right angles to the crankshaft to isolate vibration, stiff fore and aft to take the propeller thrust.
12mm Stud
Min. Height With Adjustment Nut (A)
Capacity / Mount
Mount Pre-Loaded
Height (B)
5" 4"
Part #
Deflection
12mm or 5/8" UNF
800-038
30 - 90 lbs
0.07"
0.07" - 0.14"
2.03"
3.9"
800-039 70 - 170 lbs
0.07"
0.07" - 0.14"
2.03"
3.9”
2.18"
B
5/8" Stud
A
800-040
30 - 91 lbs
0.07"
0.07" - 0.14"
2.19"
4.57”
This mount has a low height giving good vibration isolation. 800-041 70 - 171 lbs 0.07" 0.07" - 0.14" 2.19"
4.57”
0.51"
SHEAR LOADED SUPER MOUNTS The R&D Shear Loaded Super Mounts accommodate a wide range of applications in a marine or industrial environment. Each mount has an oil shield to protect the rubber and has exceptional dampening in all directions. 5/8" Stud
Min. Height With Adjustment Nut (A)
Capacity / Mount
Mount Pre-Loaded
Height (B)
Part #
Deflection
5" 4"
800-037
50 - 175 lbs
0.09"
0.09" - 0.21"
3.05"
5.38"
800-010
80 - 230 lbs
0.09"
0.09" - 0.21"
3.05"
5.38"
5/8" or 3/4" UNF
800-011 120 - 410 lbs
0.09"
0.09" - 0.21"
3.05"
5.38"
B
800-012 250 - 560 lbs
0.09"
0.09" - 0.21"
3.05"
5.38"
2.75"
800-014 300 - 680 lbs
0.09"
0.09" - 0.21"
3.05"
5.38"
A
3/4" Stud
800-020
80 - 231 lbs
0.09"
0.09" - 0.21"
2.93"
6.5"
X
0.51"
800-021 120 - 411 lbs
0.09"
0.09" - 0.21"
2.93"
6.5"
“X” Dimensions on initial installation should not be less than 3.8mm (0.15”).
800-022 250 - 561 lbs
0.09"
0.09" - 0.21"
2.93"
6.5"
800-023 300 - 681 lbs
0.09"
0.09" - 0.21"
2.93"
6.5"
TO ORDER VISIT WWW.PYIINC.COM OR CALL 425-355-3669
38
R&D MARINE |
Made with FlippingBook HTML5