DOUBLE BEARINGS Rudder Bearings with Rollers TYPE 6D
Twin-PETP Self-Aligning Roller Bearings for Rudder Shaft Diameters 30mm - 160mm
The 6D series bearings combine a very simple installation with a very smooth operation under all circumstances as the bearing will always be aligned to the rudder shaft. The bearing is made of PETP (also known as Arnite, Ertalyte, Sustodur & Ultradur) in a GRP tube, allowing it to be laminated directly into the hull. It’s primarily meant to be used on tiller steered boats, but could be used on wheel steered boats if the tiller arm/ quadrant is above the top bearing. As the bearing is self-aligning, there will be no torque transmitted to the hull, just rudder forces and the bearing will never try to twist out of the hull. The bearing ball can be easily removed out of the housing for installation safety or replacement damage if future damage occurs.
Rudder Shaft Diameter (30mm - 160mm)
TYPE 6S Twin-PETP Roller Bearings for Rudder Shaft Diameters 30mm - 169mm
The 6S series bearings are developed as a more affordable alternative on the 6D bearings. The bearing is made of PETP (also known as Arnite, Ertalyte, Sustodur & Ultradur) in a GRP tube, allowing it to be laminated directly into the hull. It’s primarily meant to be used on tiller steered boats, but could be used on wheel steered boats if the tiller arm/quadrant is above the top bearing.
Rudder Shaft Diameter (30mm - 169mm)
TO ORDER VISIT WWW.PYIINC.COM OR CALL 425-355-3669
60
JEFA RUDDER BEARINGS |
Made with FlippingBook HTML5