Note: *** PNP wiring : 20(GND) – 24(Out com), 21(24V+) – 23(In com) *** NPN wiring : 20(GND) – 23(In com), 21(24V+) – 24(Out com)
Basic Setting of Controller for Bit Socket Tray
The Input setting is required to select the Preset # of the Controller
I/O setting Input #1 = Preset select 1 (Pin 1) Input #2 = Preset select 2 (Pin 2) Input #3 = Preset select 3 (Pin 3) Input #4 = Preset select 4 (Pin 4) Input #6 = Driver Lock (Pin 6)
Basic Setting of Bit Socket Tray for Controller
No
Name
Value
Factory Setting
1
Master
Master
M / S select
Binary |
Binary +1
2
Binary +1
Input IO type
Binary |
Binary +1
3
Binary +1
Output IO type
Off
| On
4
Off
Alarm sound
5
0
Para init
---------------------------
6
1
Comm ID
---------------------------
7
16
Sensor num
---------------------------
8
I/O
I/O
| Serial
Protocol
Off
| On
9
Off
Mapping enable
10
0
Bit mapping
---------------------------
11
10
LCD off time
---------------------------
12
0000
Password
0000
Off
| On
13
On
Preset output
14
---------------------------
None
Sensor color
Made with FlippingBook Annual report maker