Operation
Master Mode
A preset # of the ECT, EC or MD tool or other tool is automatically chosen by the I/O when the bit is selected on the bit socket tray.
When one bit is selected, the corresponding output signals are provided to the tool controller in order to select the preset #.
Otherwise the socket tray will provide the tool disable.
Master mode
Yes
No
1) Alarm LED blinking 2) Tool disable output 3) Selection output signal
Number of active socket sensors ≤ 1
Yes
1) Indicating LED is continuously turned ON. 2) Provide the output signal of the selected socket position for preset# selection
No te: The device isn't dynamic and cannot auto-switch between modes
Made with FlippingBook Annual report maker