How to set (Master mode example)
1. M/S select (no.1): 2. Protocol (no.8):
Master
mode
I/O or Serial
3. Mapping enable (no.9): 4. Bit mapping (no.10):
ON
Input setting value in Bit or Preset
4.3.10 LCD off time This is a function to change the LCD screen to power saving mode. The LCD screen turn off when the key button is not used for a certain period. - The minimum setting unit is minutes. - If the value is set to 0, the power saving mode operation is disabled. If the value is set to 0, the power saving mode operation is disabled.
4.3.11 Password This password is used to enter the parameter setting window
- The initial password is “0 0 0 0”. - After setting the password, press the “SET” key. The initial password is “0 0 0 0”. After setting the password, press the “SET” key. Password O → Parameter setting window Password X → Operation window If you lose your password, it will be initialized if you press the F4 key more than 30 times in the (SETTING) screen. - Password O - Password X - If you lose your password, it will be initialized if you press the F4 key mor
4.3.12 Preset output Controls the preset output signal. - In Slave mode, Turn OFF when you do not need preset output signal. - In Master mode, it should always be set to ON. In Slave mode, Turn OFF when you do not need preset output signal. In Master mode, it should always be set to ON.
4.3.13 Bit color Select each color of bit - After color select. Color sensor check selected color. - “None” LED turn off. After color select. Color sensor check selected color.
Made with FlippingBook Annual report maker