- Red, green, sky, yellow, and white are the basic colors of the bit. - When using "Sensing", sensor read and express the color of the current bit, but we recommend using the default color. 4.4 Serial communication to select screwdriver Preset # Instead of screwdriver preset # section, RS422 serial communication is also available to select screwdriver preset #. Communication baud rate is 115200 bps. green, sky, yellow, and white are the basic colors of the bit. When using "Sensing", sensor read and express the color of the current bit, but we recommend using the
- No.6 Comm ID: 1 ~ 9 (Default 1) - No.8 Protocol: Serial
Comm ID is a number that identifies the bit socket tray during communication. When different bit socket trays are connected, they must have different numbers. Communication method is described in (7. Communication protocol) the bit socket tray during communication. in (7. Communication protocol).
(COM cable details)
Use direct LAN cable for RS-422 serial communication with following pin configuration. communication with following pin configuration.
Bit Socket Tray
Receiver
4.5 Recognize color of bit The color of bit can only be the specified color. Recommend using 5 colors: red, green, yellow, sky, and white. The color border should be at least 2cm to 2.7cm at the bottom of the bit for recognition. The recognition may be inaccurate if the color border is highly contaminated.
Made with FlippingBook Annual report maker