Simply the Best Tool Connection - Feb. 15 - Mar. 31, 2025

45 D

• (5) adapters for 2- and 4-wheel disc brake assemblies of most cars • May be used on or off the car • Helps prevent damage to the piston and boot UNIVERSAL DISC BRAKE CALIPER TOOL

• For use on most domestic and import 2WD and 4WD vehicles • Use on front or rear disc brakes • Includes tools and adapters for both right- and left-handed threads • Use on main brakes and parking brake systems 18-PC. DISC BRAKE CALIPER TOOL SET ATD-5165. ............................................. ​$95.49​

LIS-25000.................................................... ​$95.99​

BRAKE PISTON WIND BACK TOOL, 2 & 3 PIN LIS-29090...................................................​$77.19​ Includes an 11-1/2” long driver that allows bushings to be driven straight without removing the hub assembly. Double-sided cone snaps onto driver to drive out and install bushings. Also removes truck leaf spring bushings. 2-PC. TRUCK ANCHOR PIN BUSHING DRIVER

AIR BRAKE SERVICE TOOL KIT • Removal tools for slack adjusters and push-rod clevis pins used on brake systems of class 7 and 8 vehicles • Works on manual and automatic slack adjusters • Includes 2 slack adjuster pullers and a brake clevis pin press ATD-5164. .............................................. ​$236.49​

• Adapter will work on right or left hand rewind calipers • 2 Pin range is from 1/2” to 1-1/2” • 3 Pin range is from 1” to 1-11/16. Use with a 3/8” square drive

FRONT WHEEL DRIVE BEARING ADAPTER KIT These front wheel bearing adapters replace wheel bearings while keeping the steering knuckle and strut assembly intact on the vehicle, eliminating the need for front end alignment once the service work is done. • For front wheel drive cars and light trucks • Black oxide finish • Custom case for storage ATD-8625. ............................................................ ​$131.69

LIS-25200...........................................................................................​$41.95​

• 11 Point Socket for Air Disc Brake Caliper Adjustment • Works on Bendix ADB 22X, ADB 225, SN6, SN7, SK7 air disc brake 11-PT. TRUCK BRAKE CALIPER SOCKET

LIS-29120​........................................................... $10.29​

BRAKE SPRING BAR

10-PC. BEARING RACE AND SEAL DRIVER KIT

• Slip the hook into retaining spring loop and press down against the axle to remove spring. Lever action against the axle eliminates need for wrenches, pry bars and screwdrivers. Tool is 18” long with a molded handle for comfort. The tool has a black oxide finish.

$34.29​ LIS-40030

• Includes driver handle and (9) adapter sizes • Range: 1-1/2” to 3” • Easier to install bearing races and seals without damage to race, axle housing or brake rotors

BRAKE SPRING FORK

ATD-8622. ........................................................ ​$88.19​

• The tip design cradles the return spring to keep it from sliding off. Heat treated material and extra-long shaft provides strength and stability. Ergonomic handle for comfort.

17-PC. BRAKE CALIPER SOCKET SET • Complete coverage for most foreign and domestic brake caliper applications • Includes specialty brake caliper bits and sockets in one set

LIS-39770​......................................................................................$34.79​

SMALL BRAKE CALIPER PRESS

• Works on small and medium single piston brake calipers found in subcompact to midsize cars with single piston calipers • ACME screw for durability • Size Range: .95” to 2.25” (compared to 1.5” to 3” on the Lang 279) KAS-277............................................​$64.59​

ATD-5117. ..........................................................​$106.29​

HEAVY-DUTY BEARING RACE AND SEAL DRIVER SET Fits most Class 8 over the road trucks and trailers, and some medium duty trucks. • Use the tapered driver side for bearing races and the flat side for seals. Includes (6) drivers and handle exten- sion for driving bearing races and seals on hubs with deep brake drums without removing the drums. • Range: 3-43/64” to 6”

BRAKE CALIPER PRESS

• Works on twin & quad piston fixed calipers,and single & twin piston floating calipers • Size Range: 1.5” to 3” • Made in USA KAS-279............................................$73.69

LIS-61900................................................................​$278.69​

• (11) drivers to fit automobiles and trucks up to 1 Ton • Drivers can be used on bearing races and seals • Range: 1-1/2” to 4-1/2” • (2) handles, (1) for hammering and (1) for use with an air hammer MASTER PNEUMATIC BEARING RACE AND SEAL DRIVER SET LIS-12800....................................​$158.69​

2-PC. AUTOMATIC SLACK ADJUSTER TOOL SET • Specifically designed for installation and servicing of Meritor air brake systems • 5/16” double-square head reversible wrench with built-in ratcheting mechanism is offset to provide increased clearance

BENDIX/KNORR-BREMSE AIR DISC BRAKE PAD RETAINER TOOL

• The only tool for servicing Bendix/Knorr-Bremse air disc brakes • A safer and easier way to remove pad retainer

• 2’ air hose and air bladder • Air control valve for inflating and controlled deflating • Safety relief valve to prevent overinflating T.O.M.C.A.T. AIR ASSISTED CAMBER ADJUSTMENT TOOL JDO-TC614​................................................... $239.95​

LOC-891........................$52.49​ ATD-5166. .............................. $44.69​

SLACK ADJUSTERS

7578

8569

KAS-4651 Rockwell/Arvin Meritor Slack Adjuster Release Tool & Wrench......... ​$62.89​ KAS-8569 9/16” Bendix Slack Adjuster Wrench................................................. $49.69​ KAS-7578 7/16” Haldex Slack Adjuster Wrench................................................. ​$33.89

4651 (both tools)

SLACK ADJUSTER ROD PIN PRESS

2-IN-1 S-CAM BRAKE TOOL

DISC BRAKE PISTON TOOL

SPEEDY BRAKE PAD SPREADER

DUAL PISTON BRAKE CALIPER COMPRESSOR

Spring-loaded plunger automatically centers the press on the slack adjuster rod clevis pin, for easy removal.

Comprised of a steel shaft with a U-shaped fork on one end to stretch the retaining spring so that both halves of the brake shoe are held together, which enables the user to hook up the pin. An S-shaped device on the opposite end enables the user to position the brake shoes in a way that allows leverage for installation of the rollers.

Rotate the parking brake activated piston back into the caliper

LIS-41840.................................. $78.79​

Spring-loaded plunger automatically centers the press on the brake clevis pin, for easy removal. BRAKE CLEVIS PIN PRESS

cylinder when replacing worn pads on vehicles equipped with four wheel disc brakes

• Compresses brake piston in seconds making dual piston pad replacement an easy job

• Compresses brake pad in seconds making brake pad replacement an easy job

LIS-41850............................... $99.49​

ATD-5163. ..................​$37.29​

LIS-25750.........​$65.99​ ATD-5060. ........​$10.99​ LIS-24300.........​$53.19​

Made with FlippingBook flipbook maker