Simply the Best Tool Connection - Feb. 15 - Mar. 31, 2025

52 D

10-PC. FLARE NUT SOCKET SET

VENT CAP WRENCH FOR DAVCO Double-ended wrench removes vent cap on top of Davco chassis mounted fuel filter system canisters

WATER PUMP SPROCKET HOLDER - ECOTEC

Works on ABS, master cylinder, coolant, and diesel injection sensors. 3/8” square drive with chrome finish. Set includes: 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm and 19mm

LIS-61070............................................................................. ​$13.99​

Holds the timing chain and gear in place while removing or installing water pump on Ecotec engines.

SHOCKIT ™ SOCKET DIESEL NOX & PARTICULATE SENSOR REMOVAL KIT

SHOCKIT ™ O2 SENSOR REMOVAL KIT

LIS-12030..................................................​$169.49​

IPR SOCKET FOR FORD 6.0L AND INTERNATIONAL DIESEL LIS-13800...................... ​$40.29​

OXYGEN SENSOR WRENCH

• The Shockit™ O2 Sensor Removal Kit, powered by an air hammer, effortlessly removes frozen or obstructed O2 sensors • Engineered for NOx sensors on diesel truck engines, including Kenworth, Cummins, International, Detroit, and Volvo. With low and long profiles, it suits various access requirements

Slot in tool has been modified to fit larger connectors on injector pressure regulators found on International die- sels. Use with 3/8” square drive .

6 pt.

Remove even the most stubborn diesel exhaust sensors with the Shockit™ Socket Diesel NOx and Particulate Sensor Removal Kit. This kit utilizes the force and vibra- tion of an air hammer to loosen the most rusted sensors.

• 6 and 12 point with flex head • Works on all oxygen sensors with 7/8” hex • 9” handle length

12 pt.

LIS-68210...................... ​$29.19​ LOC-LT996D................. ​$349.95​ LOC-LT994................... ​$172.95​

11-PC. OXYGEN SENSOR AND SENDING UNIT SOCKET SET ATD-5665. ...................................................​$39.29​

FLYWHEEL LOCKING TOOL FOR 6.6L DURAMAX

COMPACT WRENCHES FOR DAVCO AND PACCAR- High strength laser-cut steel for durability Number Size Applications Price

LIS-61380

Works on 6.6L Duramax engines with Allison automatic trans- missions

• For removal and installation of oxygen sensors, oil pressure sending units and vacuum switches • Includes a variety of socket & wrenches for use on most domestic and imported vehicles • For use with 3/8” and 1/2” drive ratchets

Any diesel engine found in Caterpillar CT660, CT11, CT13, CT15, Cummins, Detroit Diesel, International, Mercedes Benz, Paccar, Daimler Trucks North America, Kenworth, Mack, Navistar, Peterbilt, Thomas Built Buses and Volvo. Detroit Diesel DD13, DD15 and DD16 engines found in Pac- car, Daimler Trucks North America and Volvo. 3/8” Square drive. Works on fuel filters found on Kenworth, Peterbilt and Cummins diesels.

LIS-61180

$34.29

6”

LIS-61170 LIS-61180 LIS-61190

LIS-61190

$38.59

8”

LIS-22100...................... ​$47.19​

ATD-5666. .................................................​$107.29​

LIS-61380

$23.89

FUEL TANK LOCK RING KIT

FORD DIESEL FUEL FILTER WRENCH

VARIABLE PIN SPANNER WRENCH

UNIVERSAL CAMSHAFT BEARING TOOL

11-PC. GASKET HOLE PUNCH SET

CHRYSLER CAM PHASER MASTER SET VVT & VVL

Channel design on body allows 2 inter- changeable sets of legs to adjust to fit

• For Ford power stroke and International/ Navistar • Low-profile design for easy access in tight quarters

Includes: Driving shaft, driving shaft extension, expander unit, (5) split driving plugs, (2) driving collars, centering cone and molded case.

rings from 4” to 7-1/4” and keeps the drive centered

Accommodates the most common metric size pin configurations includ- ing: 3.5mm, 4mm, 4.5mm, 5mm, 6mm, 7mm and 10mm

• (10) punch sizes: 1/4”, 5/16”, 3/8”, 7/16”, 1/2”, 9/16”, 5/8”, 3/4”, 7/8”, 1”, and long driving mandrel

Includes: 2 camshaft phaser holders, 5 timing chain holders & L-pin • Applications: 2011-2022 Chrysler, Dodge & Jeep models

ATD-5405. .........​$15.79​ ATD-8614. .........​$98.49​ LIS-62970..........​$66.89​ LIS-18000........​$261.59​ KAS-950............​$51.49​ CCT-5001.........​$399.95​

FAN CLUTCH WRENCHES

• 50mm • 36mm • 48mm • 32mm • 40mm • 22mm

Includes: 7/8”, 32mm, 36mm, 40mm thin, 47mm, 1-7/8”, 2”, new 52mm, and 2-1/8” driving wrenches; handle assembly; molded case. Wrenches fit FORD, GM, VW, BMW, International and Chrysler, newer Duramax and International. Use with air hammer. Removes and installs the fan clutch on many models when re- pairing or replacing water pump, timing chain, or the fan clutch. Includes: Universal Pully Holder with pin set (5x8mm); 22mm, 36mm, 36mm, 40mm and 47mm Fan Clutch Wrenches. Includes: Universal Pully Holder with pin set (5x8mm); 36mm fan clutch wrench. Square drive cut-outs designed for use with a breaker bar for added torque or length. Accommodates the 6 most com- monly used wrench sizes: 22mm, 32mm, 36mm, 40mm, 48mm and 50mm.

3406

10-Pc. Pneumatic Fan Clutch Wrench Set

LIS-43350

$199.95

KAS-41570 Fan Clutch Wrench Service Kit

$157.49

43350

Fan Clutch Wrench Set

KAS-3472

$69.29

6-in-1 Fan Clutch Wrench

KAS-3406

$40.89

41570

3472

SERPENTINE BELT TOOLS

Ratcheting Serpentine Belt Tool

Removes and installs belts on systems using the spring-loaded idler pulley. Includes: 13–19mm sockets; 3/8” and 1/2” square drives, handle assembly, extension and case. Includes: 3/8” and 1/2” square drives, 13, 14, 15, 16, 18 and 19mm sockets, extension, handle and socket set with holder. Everything you need for complete Serpentine Belt Tool vehicle coverage. Includes: long bar; three Pass-Thru® design adapters (3/8”, 1/2” and 3/4”); seven Pass-Thru® design 6-point sockets (13 – 19mm); three crowsfoot (13, 14, 15mm) and storage case. Unique magnetic faces hold the tool in place on the pulley, helping prevent damage to belt or pulley during removal or installation. Compact, one-piece tool can be used on the front or back side of the pulley. Double sided design allows the tool to work on both A/C and main drive pulleys when installing stretch belts on GM 5.3L, 6.2L, and 6.6L gas engines. The long tab is used on the A/C belt found on 2014 and newer GM trucks. The short tab can be used on the main drive belt found on 2019 and newer GM. Heat treated steel provides added strength. Black oxide finish. Used to Install the Main Stretch Belt on Extra Deep Double Pulleys. The tool holds the belt on the pulley as the engine in rotated clockwise to install the belt. Helps prevent damage to the belt or pulley during installation. Works on 2011 and newer Ford 3.5L EcoBoost and 3.7L engines, as well as 2019 and newer GM 5.3L and 6.2L engine main drive belt.

LIS-59650

$107.19

89000

LIS-59800

$69.95

Serpentine Belt Tool

15 Pc. Serpentine Belt Tool Set with Locking Flex Head Ratcheting Wrench

KDT-89000

$111.29

59370

Stretch Belt Remover/ Installer

LIS-59370

$23.59

59800

LIS-59560

$16.69

Stretch Belt Tool For GM

59560

59650

Stretch Belt Tool For Ford 3.5l & 3.7l

LIS-59350

$34.29

59350

Made with FlippingBook flipbook maker