Range overview Table of contents
G1
Sanpress Inox with SC-Contur G1
Marking pen - for Viega press connector systems Model 2490.1
PU
Article
DG
1
606 121
74
ACCESSORIES SEALING ELEMENTS
Sealing element EPDM - for potable water installation, heating installation - temperature resistant to 110 °C Model 2289
VdS
for d
internal-Ø
s
PU
Article
DG
10 10 10 10 10 10 10 10
183 400 448 387 281 595 183 523 184 452 181 208 184 940 191 153
87 87 87 87 87 87 87 87
15 16 18 22 28 35 42 54
15.1
2.6 2.6 2.6 3.1 3.1
16
18.2 22.2 28.3 35.4 42.4 54.4
✓ ✓ ✓ ✓ ✓
3.25 4.13 4.13
VdS = VdS certification
Sealing element EPDM - for Sanpress Inox XL, Profipress XL, Prestabo XL, Temponox XL, potable water installation, heating installation - temperature resistant to 110 °C Model 2389XL
VdS
for d 64.0 76.1 88.9 108.0
internal-Ø
s 5 5 5 5
PU
Article
DG
1 1 1 1
594 312 583 705 583 712 583 699
98 98 98 98
✓ ✓ ✓ ✓
66.25 77.85
90.7
110.4
VdS = VdS certification
Sealing element FKM
- for areas of application with high temperatures e.g. district heat supply systems up to 140 °C and 1.6 MPa, low-pressure steam systems ≤ 120 °C and < 0.1 MPa, solar installations/vacuum pipes Note The Prestabo system is not suitable for low-pressure steam systems! Use in any other area of application requires consultation with our Technical Consulting! Model 2286
VdS
for d
internal-Ø
s
PU
Article
DG
5 5 5 5 5 5 1
459 390 459 406 459 413 459 420 459 437 459 444 459 451
87 87 87 87 87 87 87
15 18 22 28 35 42 54
15.1 18.2 22.2 28.3 35.4 42.4 54.4
2.6 2.6 3.1 3.1
✓ ✓ ✓ ✓ ✓
3.25 4.13 4.13
VdS = VdS certification
131
Made with FlippingBook - Online catalogs