FREE FENDER COVER
PIPE STRETCHER KIT
POSI LOCK ® PULLERS
42 D
3 PC. TAILPIPE EXPANDER SET LIS-17350...................... $291.59 Collet sets expand pipes from 1-5/8” to 4-1/4”. A convenient, inexpensive alternative to hydraulic pipe expanders. Comes in a molded storage case. Expands all types of exhaust pipe, including stainless steel, from 1-5/8” to 4-1/4” in size.
$30.00 VALUE LIS-89880
Model
Capacity 2 Tons 5 Tons 10 Tons 17 Tons 20 Tons
Reach
Spread
Price
MTI-103 MTI-104 MTI-106 MTI-108 MTI-110
$129.99 $199.99 $264.59 $336.99 $369.99
3” 4” 6” 8”
.25 to 4.5”
.5 to 5” .5 to 7”
.75 to 12” 1” to 15”
• Small Expander: 1-1/8” to 1-3/4” • Medium Expander: 1-1/2” to 2-1/2” • Large Expander: 2-1/8” to 3-1/2” • (3) Spare sets of rubber O-rings
$63.29 ATD-5723
9.67”
www.posilock.com
• Cuts pipes 3/4” to 3” in diameter • (15) blades effectively cut pipe so only 1/4 turn is needed for complete cut EXHAUST CUTTER KDT-2031................................... $65.19 EXHAUST PIPE CUTTER PLIERS • Cuts pipe from 3/4” to 3-1/4” (19mm to 83mm) in diameter • Warranty does not cover normal dulling of cutting wheels from repeated use - replacement cutting chain PRT5721-01 available for purchase ATD-5721................................ $44.59
HARMONIC BALANCER INSTALLER KIT
Set includes driving screw, thrust bearing and 13 threaded adapters necessary to work on a wide range of domestic and some import harmonic balancers. Five long adapters for use on Dodge Hemi, generation III and IV GM motors, some Chrysler and some Ford including 3.5L and 4.0L. The 1.75” spacer allows the tool to work more harmonic balancers.
LIS-53790................................ $214.39
• Jaws are reversible to make four other pullers • 8-way, 2- or 3-jaw reversible pullers • Ideal for pulling smaller gears, bearings, pulleys and other press fit parts REVERSIBLE JAW PULLER ATD-3041................................... $44.99 • Heavy-duty, flange-type puller easily pulls harmonic balancers, timing gears and other parts with bolt circle diameters from 1-1/2” to 4-5/8” • Works on most cars - large and small, foreign and domestic • Will pull parts with tapped holes like flywheels, gears and pulleys HARMONIC BALANCER PULLER SET LIS-54810................................ $257.29 LATE MODEL HARMONIC DAMPENER PULLER & HOLDING TOOL SET • Remove dampener pulleys on late model vehicles without removing the radiator • Use on the following: • 1995+ Ford V8 • 2000+ GM 4.8L, 5.3L, 6.0L & 8.1L V8 • 1997+ GM 5.7l V8 • 1988+ Cadillac 4.5L, 4.6L & 4.9L V8 • 2004+ GM 3.5L I5 • 2005+ GM 2.8L I4 • 1995+ Olds 4.0L V8 • 1990+ Chrysler 2.0L & 2.4L I4 • 2003+ GM 4.2L I6 • 1995+ Mitsubishi 2.0L • 1990+ Chrysler 2.5L, 2.7L, 3.3L, 3.5L and 3.8L V6 HARMONIC BALANCER PULLER SET This kit includes a standard harmonic balancer puller, pulling screws, adapters for 3300 and 3800 GM V6 engines, and a harmonic damper pulley puller for Chrysler, GM, Mitsubishi and Dodge. Includes new interchangeable puller jaws for 3.6L V6 Chevy Camaro and Dodge 5.7L Hemi. ATD-3039................................. $147.29
17MM & 21MM LINE SOCKETS
• 17mm socket for Audi® A1, A3, A4, A6, A8, Volkswagen Passat®, and BMW® N54,N63, and S63 engines • 21mm socket for Paccar® MX 11, and MX 13 engines. Use with 3/8” square drive
LIS-12490.................................. $50.49
NO SLIP PULLEY PULLER AND INSTALLER SET • Removes and installs pressed on power steering, alternator and air pump pulleys without slipping • Fits most domestic models including GM 3.1 and Quad 4 engines • Works on traditional V shaped pulleys and serpentine belt system pulley
LIS-39000.................................. $80.59
ALTERNATOR/POWER STEERING PULLEY PULLER & INSTALLER
• Removes pressed-on alternator and power steering pulleys on late model GM (including Quad 4), Ford and Chrysler engines as well as some AMC vehicles • Reverse the jaws to pull the alternator internal bearing • Will not work on 3.3L and 3.5L Chrysler engines ATD-3052................................ $63.19
• 8 function internal or external 3-jaw puller • 5 lbs. heavy-duty hammer • Internal or external 2-jaw puller • Puller hook, rear axle puller SLIDE HAMMER PULLER SET
$139.39 ATD-3045
• Special grip wrench adapter • 5/8”x 18 threaded end
LIS-35800
LIS-35070
ATD-3390
Number
Description
Max Reach
Max Spread
Max Screw Size
Price
ATD-3044
$70.29
5 Ton, 2/3-Jaw Reversible Puller
5-1/2”
7”
9/16” -20 x 6-15/16”
CAL-68800
LIS-37160
5 TON STRAIGHT PULLER • Includes: 9” bar and (3) pairs of puller arms ATD-3047. .................. $57.89 10 TON STRAIGHT PULLER • Includes: 10” bar and (4) pairs of puller arms ATD-3048. ................ $191.59 • More convenient than standard pullers • Versatile and easy to use • Puller arms slide back and forth on yoke to adjust
FUEL LINE, A/C & AIR LINE DISCONNECT TOOLS & SETS Number Description/Contents
Price
Master Disconnect Set - (1 ea.) 3/8”, 1/2”, 5/8” and 3/4” A/C spring lock coupling tool; Ford/Chrysler heater hose disconnect tool; Chrysler, Ford/GM fuel line disconnect tools; Ford clutch coupling tool; universal fuel line disconnect tool; (1 ea.) 3/8” & 1/2” fuel line spring locking coupling tool; (1 ea.) 5/16” & 3/8” fuel line disconnect tool; Ford/GM quick disconnect tool; Ford oil cooler line disconnect tool; Ford fuel line coupling tool; Ford heater hose disconnect tool; GM heater line quick connect separator. Master Disconnect Set - Clutch coupling remover for Ford; low profile 3/8” Jiffy-tite ® disc.; low profile 1/2” Jiffy-tite ® disc.; low profile fuel line disc. set; A/C fuel line disc. set; fuel & A/C disconnect pliers; fuel module disc. tool for GM; fuel line retaining clip tool set; main fuel line disc. for Toyota & Nissan; angled disc. set; trans. oil cooler line scissors 3/8” x 1/2”; hydraulic clutch line disc. for GM; coupler disc. for Chrysler; oil cooler line disc. for Ford; fuel line disc. for Ford; 5/16” x 3/8” scissor disc.; coupler disconnect; molded case. 15 Pc. Deluxe Disconnect Tool Set - Set includes tools for use on 1/4”, 5/16”, 3/8”, 1/2”, 5/8”, 3/4” and 7/8”: fuel lines and fil- ter; fuel pressure regulators; fuel return lines; A/C fittings; oil cooler lines; radiator cooler lines; trans. oil cooler lines & vehicle specific applications.
$59.95
ATD-3390
LIS-39850
$197.29
5 TON BAR-TYPE PULLER / BEARING SEPARATOR SET • 2” and 3” bearing separators • (4) sets hex push-puller legs • 5” puller cross bar with 6-1/4” forcing screw ATD-3056. ............. $112.59
$51.59
ATD-3399
LIS-37000 LIS-39200 LIS-37160 ATD-3310 LIS-37450 LIS-35070
$9.39 $7.99
6 Pc. A/C Fuel Line Disconnect Set - 5/16”, 3/8”, 1/2”, 5/8”, 3/4” and 7/8”
Heater Hose Disconnect for FORD
$23.99 $27.09 $18.69 $88.29
Disconnect Pliers - Low profile with 85˚ bend. Works on Delphi two tab connectors and some import vehicles
RATCHETING HARMONIC BALANCER PULLER Features:
GM Thermostat Housing Wrench - Designed for GM 3.1L and 3.4L V6 engines, 1994–current. 13mm, 12 point
• Eliminates the need to remove major engine components • Ratcheting function holds jaws in place during application • Ratcheting yoke has a 7-Ton pulling capacity Applications: • FORD – 4.6L, 5.0 Coyote, and 5.4L • GM – 5.3L, 5.7 (LS1), 6.0 (LS2), 6.2 (LS3) and 7.0 • MISC – Most 3 and 6 spoke harmonic balancers/pulleys
DEF Disconnect Set - Easy access to DEF fill & breather lines on 2012 and newer Ford Power Stroke & Dodge diesel
Button Connector Pliers - Disconnect fuel and EVAP line, and DEF fittings with tabs that must be depressed to disengage
$95.99 ATD-3075
LIS-35800 $89.99 MTI-68800 Adjustable Fuel Line Pliers - Dual 180˚ swiveling jaws and long reach handles make it easier to access and disconnect the fuel and DEF lines found in automotive and commercial vehicles $41.89 6 Pc. Aluminum Disconnect Set - Disconnects work on air conditioning lines and quick connect fuel lines
Made with FlippingBook flipbook maker