ALI CERTIFIED TWO POST AUTO LIFTS
ATD ALI CERTIFIED 2 POST LIFTS
56 D
ATD-ATD2P12SALI
ATD-ATD2P10BSALI
Lift Model Capacity
TIT-21130 4-PC. TESLA JACK PAD SET Features: • For use in TESLA models S, 3, X, & Y to protect the battery, vehicle body, and chassis. • Ensures proper placement of you jack or lifting equipment • Secure fit all lifting points • Constructed of sturdy hard rubber.
10,000 lbs.
12,000 lbs. 168-1/2” 151-5/16”
Height Overall
144”
Width Overall w/ Power Unit Maximum Lift Height Width Between Columns
145-1/2”
71”
75”
116”
122”
Minimum Pad Height
4”
4-7/8”
ATD2P10BSALI
Drive Through Clearance
104” 50S
109” 50S
ATD2P12SALI
Lifting Speed
$5,639.95 ATD-ATD2P10BSALI
$7,926.95 ATD-ATD2P12SALI
Asymmetric / Symmetric Clear Floor / Floor Plate Short Arm Reach - min/max Long Arm Reach - min/max
Bi-Symmetric
Symmetric Clear Floor 37-5/8”–57”
Clear Floor
23”–45” 41”–59”
Same
Max. Load per Arm
2,500 lbs. 1,705 lbs.
3,000 lbs 2,295 lbs.
$21.59 TIT-21130
Ship Weight
Power
220V, 20A, 1PH
220V, 20A, 1PH
TWO POST CLEAR FLOOR LIFT • ALI Certified •10,000 lbs. capacity • Bi-Symmetric arm design ATD-ATD2P10BSALI
HEAVY-DUTY TWO POST CLEAR FLOOR LIFT • ALI Certified •12,000 lbs. capacity • Symmetric arm design • Rubber door guards • Direct drive push cylinders • Single point lock release • Heavy-duty arm restraint system • Spin up lift pads - 5” min. pad height • Stackable adapters included • External hose guards • Duro Certified Power Unit - MET, UL, CSA ATD-ATD2P12SALI
DELUXE FOUR POST STORAGE LIFT ATD4P8D
ATD-ATD4P8D
Lift Model Capacity
• Rubber door guards • 3-Stage front arms • Single piece column
DELUXE FOUR POST STORAGE LIFT • 8,000 lbs. capacity • Cable driven • Single point manual lock release • Adjustable locking positions • Slack cable safety • Steel approach ramps • Fits in most residential garages • Includes drip trays, jack tray and poly caster kit
8,000 lbs. 207-5/16”
Overall Length w/ Ramp Overall Width (outside base plates)
• Direct drive pull cylinders • Single point lock release • Heavy-duty arm restraint system
103-1/2”
$5,075.50 ATD-ATD4P8D
• Low profile, spin-up lift pads • Stackable adapters included • External hose guards • Duro Certified Power Unit - MET, UL, CSA
Overall Height Lifting Height
86”
74-3/4” 94-1/2” 165-1/2” 18-5/8”
Width Between Posts Length of Runways Width of Runways
COMMERCIAL TWO POST AUTO LIFT
Lifting Speed Cable Diameter
90S 3/8”
COMMERCIAL TWO POST AUTO LIFT Lift Model Capacity 9,000 lbs. Height Overall 142-7/8” Width Overall w/ Power Unit 138” Maximum Lift Height 72” Width Between Columns 113-5/8” Minimum Pad Height 4” Drive Through Clearance 96” Lifting Speed 50S Asymmetric / Symmetric Asymmetric Clear Floor / Floor Plate Clear Floor Short Arm Reach - min/max 29”–41” Long Arm Reach - min/max 37”–57” Max. Load per Arm 2,250 lbs. Ship Weight 1,370 lbs. Power 220V, 20A, 1PH ATD-ATD2P9A
ATD-ATD4P8D
Max. Clearance Under Track
70”
Base Plate Size Lock Position
10” x 12”
$4,059.95 ATD-ATD2P9A
10
Ship Weight
1,705 lbs.
Power
115V, 20A, 1PH
SIMPLY
DEAL
ATD-ATD2P9A
4 POST CAR LIFT w/EXTENDED LENGTH 4P14XFX Specifications: • Lifting Capacity: 14,000 lbs. • Rise Height/Time: 78”/90 s • Motor/Voltage: 2 Hp, 208V–230V, 60Hz, 1 Ph • Air Supply Required: 90-120 psi • ALI/ETL Certified • Visit www.challengerlifts.com
TWO POST CLEAR FLOOR LIFT • 9,000 lbs. capacity ATD-ATD2P9A
• Asymmetric arms • Chain drive cylinders • Auto arm restraint system • Internal hose routing • Stackable adapters included
• Rubber door guards • Dual point lock release • Single piece column • Low profile, spin-up lift pads
4P14XFX (Standard lift pictured)
Call for Price MTI-4P14XFX
SCISSOR LIFT
CL10V3 Series VERSYMMETRIC ® CAR LIFT CL10V3 Specifications: • Lifting Capacity: 10,000 lbs.
ATD-ATDSL6M
Lift Model Capacity
6,000 lbs.
Overall Length Overall Width Lifting Height
96-1/2”
39-5/8”–62”
Call for Price MTI-CL10V3
• Lifting Configuration: Versymmetric • Arms: 3-stage front/3-stage rear • Rise Height/Time: 74.125”/38 s • Motor/Voltage: 2 Hp, 208V–230V, 60 Hz, 1 Ph • Ceiling Height Required: 11’ 11” • ALI/ETL Certified
48-1/2”
$3,534.95 ATD-ATDSL6M
Minimum Pad Height
7”
Lifting Height w/ Adapters Width Between Runways
54” n/a n/a
ATD-ATDSL6M
CL10V3
• Includes 10315 Stack Adapter Kit • Visit www.challengerlifts.com
Width of Runways
MID-RISE SCISSOR LIFT • 6,000 lbs. capacity ATD-ATDSL6M • Single point lock release • Durable rubberized lift pads • Portable design
Lifting Speed Pad Length Ship Weight
40S
STACK ADAPTER KIT INCLUDED WITH CHL-CL10V3 LIFT 10315 Stack Adapter Kit Includes: (4) 3” stack extensions, (2) 6” stack extensions and (2) organizer racks with hardware
• 48” rise height
24” min. / 83” max.
• Dolly mounted power unit • Extended adjustable lift arms
945 lbs.
Power
115V, 20A, 1PH
Made with FlippingBook flipbook maker