FULL SUPPORT SWING SEAT ASSEMBLY INSTRUCTIONS
FSSS0518
READ, KEEP & FOLLOW THESE SAFETY INSTRUCTIONS • Product to be assembled by an adult. • Always use under adult supervision. • Always use the harness. • This product is a toy, it is not to be used as a restraint. • Inspect for damage before each use. • Do not assemble or use if parts are missing or damaged.
Adjust ropes to tilt seat backwards so that feet cannot touch the floor.
B
CONTENTS
CONTENTS
B
x 2
B x 2
F x 2
Short Ropes to the Back
x 2
x 5
Long Ropes go to the Front
x 1
L x 2
M x2
S x1
F
B
F
C x 8
D x 8
F
EN1176 Anti-Tamper parts (Only if EN1176 public play- ground certification required)
All swing seat harnesses are potentially an entanglement and strangulation hazard and their use should always be supervised.
Pass the 5 Harness Anchors through the holes from Back to front.
L
L
The Short Anchor goes through the Pommel
S
The Longest are for the Shoulders.
If your swing is in a location where it is not always possible to forsee when it will be used and by whom then you should remove the harness.
M
M
Add a Triglide to each Harness Anchor. Then Join to the 5 Male Clips found on the Harness Adjust to fit and secure by passing back through the triglide
TFH UK, 5-7 Severnside Business Park, Severn Road, Stourport-on-Severn, Worcestershire DY13 9HT T: 01299 827820 F: 01299 827035 E: tfh@tfhuk.com
www.specialneedstoys.com
Made in UK by TFH
EN1176 FULL SUPPORT SWING SEAT ASSEMBLY INSTRUCTIONS FSSS0514
SAFETY
The safety of your child depends on these instructions. This is an activty toy with moving parts. Regular checks are essential, in order to prevent the toy from becoming a hazard.
Maintenance Make deliberate and thorough checks at the beginning of each season.
• Check Swing Seat’s body, ropes (or chains) & clips and pay particular to the highest (moving) point of attachment for evidence of deterioration.
• Do not use the Swing Seat if there is evidence of deterioration. Contact TFH for replacements, which should be installed in accordance with instructions.
This Full Support Swing Seat conforms to EN 1176 (European Standards for Playground Equipment) only with the addtion of the following parts which prevent the adjustment of the swing without tools.
The 4x C Clamps (c) fit on the rope where it passes through the s-hook preventing adjustment.
2x Barrel Clamps (d) fit on the short ropes as they pass through the seat.
2x Barel Clamps (d) fit on the long ropes next to the wooden dowel, underneath the seat.
Accessories Changes to the Swing Seat must be carried out according to instructions from TFH.
TFH UK, 5-7 Severnside Business Park, Severn Road, Stourport-on-Severn, Worcestershire DY13 9HT T: 01299 827820 F: 01299 827035 E: tfh@tfhuk.com
www.specialneedstoys.com
Made in UK by TFH
Page 1 Page 2Made with FlippingBook - professional solution for displaying marketing and sales documents online