Sheet 9522-1 page 2
CAUTION Leak test with approved medium only. Leak test pressure must not exceed the specified system operating pressure. Excessive pressure will damage equipment components.
• TESTING: This equipment has been shop pressure tested and was shopped "leak free". Leaks may develop during transit, handling and installation. Always perform a leak test after installation.
• INTERCONNECTIONS: Complete all piping and wiring interconnections.
WARNING: Situations dangerous to personnel and property may exist with the operation and maintenance of any combustion equipment. The presence of fuels, oxidants, hot and cold combustion products, hot surfaces, electrical power in control and ignition circuits, etc., are inherent with any combustion application. Components in combustion systems may exceed 160°F (71°C) surface temperatures and present hot surface contact hazard. Fives North American Combustion, Inc. suggests the use of combustion systems that are in compliance with all Safety Codes, Standards, Regulations and Directives; and care in operation.
CONTACT fna.sales@fivesgroup.com T +1 800 626 3477 - F +1 216 373 4237
Fives North American Combustion, Inc. 4455 East 71st Street - Cleveland, OH 44105 - USA www.fivesgroup.com
Made with FlippingBook flipbook maker