Sheet 2300-1 Page 2
Equivalent
50 Hertz
Nominal pipe size, inches
60 Hertz Blower for estimating
Blower
Vol., cfh †
Pressure,
designation
osi
In
Out
dimensions and weights
2314-19/2-__1.5D 2314-26/2-__2D 2314-26/2-__3D 2314-26/2-__5D 2314-35/1-__7.5D 2314-35/1-__10D 2314-21/1-__15D 2314-33/1-__20D 2314-33/1-__25D 2314-33/1-__30D 2314-41/1-__50D 23165-14/3-__1.5D 23165-19/2-__2D 23165-26/2-__3D 23165-26/2-__5D 23165-35/2-__7.5D 23165-35/2-__10D 23165-21/1-__15D 23165-33/1-__20D 23165-33/1-__25D 23165-33/1-__30D 2322-19/3-__3D 2322-19/3-__5D 2322-28/2-__7.5D 2322-28/2-__10D 2322-21/2-__15D 2322-21/2-__20D 2322-21/2-__25D 2322-21/2-__30D§ 2322-33/2-__30D 2322-33/2-__40D 23305-21/2-__20D 23305-21/2-__25D 23305-21/2-__30D
11 400 14 400 25 800 41 400
14.5 14.5 14.3 14.2 14.2 13.6 14.2 14.2 14.3 13.6 12.9 17.5 16.5 17.5 16.6 17.5 16.8 16.8 17.4
3 6 6 6 8 8
3 6 6 6 8 8
2320-19/2-__3D 2320-26/2-__5D 2320-26/2-__5D 2320-26/2-__7.5D 2320-35/1-__10D 2320-35/1-__15D 2320-21/1-__20D 2320-33/1-__30D 2320-33/1-__50D 2320-33/1-__50D 2320-41/1-__75D 2324-14/3-__2D 2324-19/2-__3D 2324-26/2-__5D 2324-26/2-__7.5D 2324-35/2-__10D 2324-35/2-__15D 2324-21/1-__20D 2324-33/1-__25D 2324-33/1-__40D 2324-33/1-__40D 2332-19/3-__5D 2332-19/3-__5D 2332-28/2-__15D 2332-28/2-__15D 2332-21/2-__25D 2332-21/2-__30D 2332-21/2-__40D 2332-21/2-__40D 2332-33/2-__50D 2332-33/2-__50D 2344-21/2-__30D 2344-21/2-__40D 2344-21/2-__40D
69 000 96 000 132 000 204 000 243 000 300 000 516 000 9 000 13 200 19 200 36 000 57 000 81 000 117 000 153 000 201 000 249 000 13 800 22 200 37 200 57 000 72 000 105 000 135 000 168 000 168 000 231 000 78 000 105 000 129 000
10 12 12 12 16
10 12 12 14 16
3 4 6 6 8 8
3 4 6 6 8 8
10 12 12 12
10 12 12 14
17.1
16.5
23.4 22.2 23.8 22.6 23.7 22.8 21.2 18.0 23.7 21.2 30.6 30.6 30.0
4 4 8 8
4 4 6 6 8 8 8 8
10 10 10 10 12 12 10 10 10
12 12
8 8
10
† Service factor is 1.0 on all 50 Hz motors. § When ordered as a special blower with 22 ½ " impeller at additional cost (standard impeller is 21"), it will deliver 147 000 cfh at 25.6 osi.
WARNING: Situations dangerous to personnel and property may exist with the operation and maintenance of any combustion equipment. The presence of fuels, oxidants, hot and cold combustion products, hot surfaces, electrical power in control and ignition circuits, etc., are inherent with any combustion application. Components in combustion systems may exceed 160°F (71°C) surface temperatures and present hot surface contact hazard. Fives North American Combustion, Inc. suggests the use of combustion systems that are in compliance with all Safety Codes, Standards, Regulations and Directives; and care in operation.
CONTACT fna.sales@fivesgroup.com T +1 800 626 3477 - F +1 216 373 4237
Fives North American Combustion, Inc. 4455 East 71st Street - Cleveland, OH 44105 - USA www.fivesgroup.com
Made with FlippingBook flipbook maker