Sheet 2300-3 Page 4
* Explanation of designation: 2304-11/1-—.3V means 2300 series, 4 osi pressure, inner housing no. 11, 1 stage, 1⁄3 hp motor, V-belt drive. Z = motor overhang for TEFC motors. There is no overhang for drip-proof motors.
8-hole base. 6-hole base. ‡ Listed T and U dimensions are for SW inlet. For threaded inlet, T is 5⁄16 " for inner housing no. 11, ½ " for others. If S is greater than 6", threaded inlet is not available. † SW discharge (unthreaded pipe) 8" and larger is standard and is included in F. § Female pipe thread 6" and smaller is standard. If SW discharge (unthreaded pipe) is specified, add 3 ¼ " to F. All dimensions are in inches. Dimensions shown apply only to blower with T-frame motors. Consult Fives for dimensions of blowers with other motors.
Dimensions in inches
Blower designation
B
D
U
2304-11/1-—.3V 2308-11/3-—.3V 2310-11/4-—.5V 2312-11/4-—.5V
2 1⁄8
15 5 /
18 9⁄16 20 11⁄16
16
4 1 /
17
7 /
2" unthreaded pipe if "SW" discharge is specified. if "SW" discharge is specified.
4
16
5 7⁄16 5 7⁄16
18 ½ 18 ½
21 ¾ 21 ¾
DIMENSIONS SHOWN ARE SUBJECT TO CHANGE. PLEASE OBTAIN CERTIFIED PRINTS FROM FIVES NORTH AMERICAN COMBUSTION, INC. IF SPACE LIMITATIONS OR OTHER CONSIDERATIONS MAKE EXACT DIMENSION(S) CRITICAL .
WARNING: Situations dangerous to personnel and property may exist with the operation and maintenance of any combustion equipment. The presence of fuels, oxidants, hot and cold combustion products, hot surfaces, electrical power in control and ignition circuits, etc., are inherent with any combustion application. Components in combustion systems may exceed 160°F (71°C) surface temperatures and present hot surface contact hazard. Fives North American Combustion, Inc. suggests the use of combustion systems that are in compliance with all Safety Codes, Standards, Regulations and Directives; and care in operation.
CONTACT fna.sales@fivesgroup.com T +1 800 626 3477 - F +1 216 373 4237
Fives North American Combustion, Inc. 4455 East 71st Street - Cleveland, OH 44105 - USA www.fivesgroup.com
Made with FlippingBook flipbook maker