North American 2300 High Pressure Blowers Outboard Bearing Type
Sheet 2300-8 Ref: Dwg. B7-1496
High pressure blowers of the multi-stage, outboard-bearing type are available in the sizes listed below. All ratings are based on 1.0 service factor. 1.15 service factor motors are supplied, so the ratings can be increased up to 15%, but discharge pressures will decrease with the increased volume on most models. Refer to Drawing B7-1496 for typical dimensions.
Pressure
Volume
Designation
hp
osi †
psi †
scfm
scfh
2360-19/5-10C 2360-19/5-15C
10 15
60 48
3.75
220 460
13 200 27 600
3
2364-28/4-25C 2364-28/4-30C
25 30
64 56
4
810
48 600 61 800
3.5
1030
2380-28/5-30C 2380-28/5-40C
30 40
80 69
5
800
48 000 69 000
4.3
1150
† Measured at rated volume (1.0 service factor).
Consult Fives North American Combustion, Inc. for prices .
WARNING: Situations dangerous to personnel and property may exist with the operation and maintenance of any combustion equipment. The presence of fuels, oxidants, hot and cold combustion products, hot surfaces, electrical power in control and ignition circuits, etc., are inherent with any combustion application. Components in combustion systems may exceed 160°F (71°C) surface temperatures and present hot surface contact hazard. Fives North American Combustion, Inc. suggests the use of combustion systems that are in compliance with all Safety Codes, Standards, Regulations and Directives; and care in operation.
CONTACT fna.sales@fivesgroup.com T +1 800 626 3477 - F +1 216 373 4237
Fives North American Combustion, Inc. 4455 East 71st Street - Cleveland, OH 44105 - USA www.fivesgroup.com
Made with FlippingBook flipbook maker