Sheet 2400-6DF Page 2
Discharge Discharge
SW
SW
Discharge
Blower
1, 2, and 3
4
Inner
Outer cover
Motor
Inlet
inlet
discharge
fl ange gasket
designation
base
base
housing
Impeller
shim
guard
adapter
adapter
2416-F-_15
1-2160-2
1-2492-2 1-3944-3†
1-2168-1
1-3000-52† 1-1662-2†
1-3584-4 1-1485-1
1-1680-4
1-0832-3
1-3944-2‡
1-3000-43‡
None‡
2416-F-_20
1-2160-2
1-2492-2 1-3944-2
1-2168-1
1-3000-54
None
1-3584-4 1-1485-1
1-1680-4
1-0832-3
2416-F-_25
1-2160-2† 1-2160-3‡
1-2492-2† 1-3944-2† 1-2492-3‡ 1-3944-1‡
1-2168-1
1-3000-55† 1-3000-56‡
None
1-3584-4 1-1485-1
1-1680-4
1-0832-3
2416-F-_30
1-2160-3
1-2492-3 1-3944-1
1-2168-1
1-3000-57
None
1-3584-4 1-1485-1
1-1680-4
1-0832-3
2420-F-_15
1-2160-2
1-2492-2 1-3944-3†
1-2168-1
1-3000-70† 1-1662-2†
1-3584-4 1-1485-1
1-1680-4
1-0832-3
1-3944-2‡
1-3000-71‡
None‡
2420-F-_20
1-2160-2
1-2492-1 1-3944-2
1-2168-1
1-3000-72
None
1-3584-4 1-1485-1
1-1680-4
1-0832-3
2420-F-_25
1-2160-2† 1-2160-3‡
1-2492-2† 1-3944-2† 1-2492-3‡ 1-3944-1‡
1-2168-1
1-3000-73† 1-3000-74‡
None
1-3584-4 1-1485-1
1-1680-4
1-0832-3
2420-F-_30
1-2160-3
1-2492-3 1-3944-1
1-2168-1
1-3000-75
None
1-3584-4 1-1485-1
1-1680-4
1-0832-3
2424-F-_20
1-2160-2
1-2492-2 1-3944-2
1-2168-1
1-3000-88
None
1-3584-4 1-1485-1
1-1680-4
1-0832-3
2424-F-_25
1-2160-2† 1-2160-3‡
1-2492-2† 1-3944-2† 1-2492-3‡ 1-3944-1‡
1-2168-1
1-3000-89† 1-3000-90‡
None
1-3584-4 1-1485-1
1-1680-4
1-0832-3
2424-F-_30
1-2160-3
1-2492-3 1-3944-1
1-2168-1
1-3000-90
None
1-3584-4 1-1485-1
1-1680-4
1-0832-3
† For Blower with Drip-Proof Motor. ‡ For Blower with TEFC Motor.
SW Inlet Adapter. Figure 1 shows an SW Inlet Adapter which may be specified in place of an inlet guard. An SW Inlet Adapter is suitable for use with Series 2947 Blower Sleeves, or for making a welded pipe connection. Add the price of the SW Inlet Adapter to the standard blower list price.
Figure 1
WARNING: Situations dangerous to personnel and property may exist with the operation and maintenance of any combustion equipment. The presence of fuels, oxidants, hot and cold combustion products, hot surfaces, electrical power in control and ignition circuits, etc., are inherent with any combustion application. Components in combustion systems may exceed 160°F (71°C) surface temperatures and present hot surface contact hazard. Fives North American Combustion, Inc. suggests the use of combustion systems that are in compliance with all Safety Codes, Standards, Regulations and Directives; and care in operation.
CONTACT fna.sales@fivesgroup.com T +1 800 626 3477 - F +1 216 373 4237
Fives North American Combustion, Inc. 4455 East 71st Street - Cleveland, OH 44105 - USA www.fivesgroup.com
Made with FlippingBook flipbook maker