Sheet 1000-6
Slam-shut valves are used for the protection against high pressure for all valves connected downstream of a gas regulator. The gas supply is shut off if the downstream pressure exceeds the spring set point of the slam-shut valve. FEATURES North American Slam-shut Valves
• Senses excess pressure downstream of pressure regulator • Broad adjusting range for the response pressure • Low pressure loss
SPECIFICATIONS
Maximum inlet pressure: 60 psig (4 bar) Operating temperatures: 5°F to 140°F (-15°C to 60°C) Available spring ranges: 8"w.c. to 8.0 psig (18 to 550 mbar) Body material: Aluminum End connections: 1", 1 ½ " NPT, 2" - 4" ANSI flanged Downstream sensing line required ( 1⁄8 " NPT connection on 1" and 1 ½ " sizes, Rp ¼ " on 2", 3" and 4" sizes). When used upstream of a regulator install sensing line ≥ 5 pipe diameter downstream of regulator. Vent connection: ¼ " Rp (vent to an approved location)
DIMENSIONS
Drilling in. (mm)
Dimensions in. (mm)
Flange in. (mm)
Weight
No.
Connection
L
H1
H2
T
E
D2
K
d2
holes lbs(kg)
NPT 1"
3.58 (91) 5.91
6.56 (159)
0.91 (23) 2.01
1.69 (143) 1.69 (43)
3.43 (87) 3.43 (87)
— — — —
— — — —
— — — —
— — — —
2.2
(1)
NPT 1 ½ "
8.11
5.07 (2.3) 26.5
(1500 7.09 (180) 8.66 (220)
(206) 7.28 (185) 7.68 (195) 8.86 (225)
(51)
ANSI 2"
3.27 (83) 3.94 (100) 4.33 (110)
— — — — — —
— — — — — —
6.49 (165) 7.87 (200) 8.66 (220)
4.92 (125) 7.87 (160) 8.66 (180)
0.71 (18) 0.71 (18) 0.71 (18)
4
(12)
ANSI 3"
8
35.3
(16)
ANSI 4"
10.6
8
48.5
(270)
(22)
Made with FlippingBook flipbook maker