Ordering information, 4058-A retraction assembly
4058-_A IGNITER RETRACTION ASSEMBLY W/O CSS IGNITER
4058-
A ( -
-
) Configured Options
Adapter Flange AF-NONE Without Adapter Flange
Cylinder
Stroke
08
8" (203mm) 12" (305mm) 16" (406mm) 20" (508mm) 24" (610mm)
AF-2 1 ¼ " NPT Pipe Fitting to 1 ½ " ANSI Flange AF-3 1 ½ " NPT Pipe Fitting to 1 ½ " ANSI Flange AF-4 2" NPT Pipe Fitting to 1 ½ " ANSI Flange AF-5 2 ½ " NPT Pipe Fitting to 1 ½ " ANSI Flange AF-6 3" NPT Pipe Fitting to 1 ½ " ANSI Flange
12 16
20 24
Compression Fitting I.D. A
.69 w/3 Rings 1/8" Packing
CEG-120-SWO ; CE/ATEX general purpose and hazardous area, 120 VAC, no switches CEG-240-SW0 ; CE/ATEX general purpose and hazardous area, 240 VAC, no switches CEH-024-SW0 ; CE/ATEX general purpose and hazardous area, 24 VDC, no switches
ULG-120-SW0 ; UL/CSA general purpose, 120 VAC, no switches ULG-240-SW0 ; UL/CSA general purpose, 240 VAC, no switches
ULH-024-SW0 ; UL/CSA general purpose and hazardous area, 24 VDC, no switches CEG-120-SW1 ; CE/ATEX general purpose and hazardous area, 120 VAC, 1 switch CEG-240-SW1 ; CE/ATEX general purpose and hazardous area, 240 VAC, 1 switch CEH-024-SW1 ; CE/ATEX general purpose and hazardous area, 24 VDC, 1 switch
ULG-120-SW1 ; UL/CSA general purpose, 120 VAC, 1 switch ULG-240-SW1 ; UL/CSA general purpose, 240 VAC, 1 switch
ULH-024-SW1 ; UL/CSA general purpose and hazardous area, 24 VDC, 1 switch CEG-120-SW2 ; CE/ATEX general purpose and hazardous area, 120 VAC, 2 switches CEG-240-SW2 ; CE/ATEX general purpose and hazardous area, 240 VAC, 2 switches CEH-024-SW2 ; CE/ATEX general purpose and hazardous area, 24 VDC, 2 switches ULG-120-SW2 ; UL/CSA general purpose, 120 VAC, 2 switches ULG-240-SW2 ; UL/CSA general purpose, 240 VAC, 2 switches ULH-024-SW2 ; UL/CSA general purpose and hazardous area, 24 VDC, 2 switches
Electrical Standards ULG : UL/CSA - General Use (USA)/(Canada) ULH : UL/CSA - Class I Div. 2 Groups A, B, C, D (Classified Area) CEG : CE - General Use (Europe) CEH : CE Ex II 3G IIC T4 ATEX (Classified Area - 24V only)
Pneumatic Solenoid Voltage 024 24 VDC - ATEX and General Use
End Switches for Position Sensing SW0 None SW1 One switch for extended position SW2 Two switches for extended & retracted positions 120 110 - 140 VAC NOT Available for ATEX (EX) 240 220 VAC 50/60 Hz NOT Available for ATEX (EX)
Bulletin 4058 page 17
Figure 15
Made with FlippingBook flipbook maker