Actuator Selection | 1199 Series
ACTUATOR SELECTION Select desired running time, operating voltage, control/feedback options, to specify actuator designation. Use Table A and Table B (below) to specify actuator designation (see 1615 literature† for additional information and specifications).
Table A.
Part
Torque Running Time (1) (lb-in) 90° at 60 Hz (sec.)
Input Voltage
Feedback
Degrees of Zero and Span
Input Control
Number
(VAC)
Signal
Travel (8)
Adjustment
1615-B 1615-D 1615-E 1615-I 1615-K 1615-N 1615-P 1615-W 1615-X 1615-Y
140 200 200 310 400 140 200 310 310 400
25 25 25 37 50 25 25 37 37 50
110-120 110-120 110-120 110-120
4-20 mA 4-20 mA 4-20 mA Floating
None None
90° 90° 90°
Yes Yes Yes No Yes Yes Yes Yes Yes Yes
1000Ω
None
160°
220-240 220-240
(3)
(4)
90° 90° 90° 90° 90° 90°
4-20 mA
None
110-120 110/120
(3)
(4)
3 3 3
4 4 4
220/240
110/120
NOTES: (1) Multiply running time by 1.2 for 50 Hz.
(3) All inputs/outputs, linearization, split ranging, and pre-set positioning, 4-20mA, 0-10vdc, 0-20 mA, and line voltage. (4) Actuators with the multi-functional circuit board have the following output signals: 4-20 mA, 0-10 V dc, and 0-20 mA (5) Actuator shafts are 3⁄8 " square for 1615-A - L and 1615-N - R (6) All actuators will contain 2 limit switches and 4 auxiliary SPDT switches (7) All actuators will use the red scale indication with the double switch cam indicators.
Table B.
Part
Torque
Running
Input
Input
Feedback
Degrees of Travel
Enclosure
Number
(lb-ft )
Time (sec.)
Voltage (VAC)
Control 4-20mA 4-20mA 4-20mA 4-20mA
Signal
R410-8342 R410-8341 R410-8344 R410-8343
30 30 30 30
24 24 24 24
120 120 120 120
4-20mA 4-20mA 4-20mA 4-20mA
90° 90° 90° 90°
NEMA 4
Explosion proof Class 1, Div. 1
NEMA 4
Explosion proof Class 1, Div. 1
Bulletin 1199 Page 6
Made with FlippingBook flipbook maker