North American Products | 1600 Air Motors
1600-B and 1600-BP Air Motor with speed control
1600-M Air Motor with dual monitor display
1600 Air Motor with top mount positioner
1600-A Air Motor with auxiliary switch
The 1600 Air Motor is used to drive butterfly, adjustable port, or other type of control valve, using pneumatic signals from a temperature controller or other source. The motor produces 200 pound-inches of torque for each 1 psi control air pressure, or a total of 3000 pound-inches for a standard 1600 Air Motor with a 15 psi control signal. 2800 of the total 3000 pound-inches produced is utilized in compressing the internal spring, leaving 200 pound-inches useful torque at motor arm. Useful torque is measured at the motor arm while avail- able torque is measured at the control valve. Available torque is the maximum torque left to move the control valve after all losses have been considered.
FEATURES
— Easy field adjustment. — Factory adjusted for 3 psi start, 15 psi full travel. — Integral top-mounted positioner available to provide seven times as much torque for better response.
Bulletin 1600 Page 2
Made with FlippingBook flipbook maker