Assembly | 1600- -M
1600 AIR MOTOR with DUAL DISPLAY MONITOR
Dual display monitor
9 ¼
Assembly Procedure
1) Install a 5⁄16 -18 jam nut onto the adapter stud up to the shoulder. 2) Remove (2) 5⁄16 bolts from the frame, one at 12 o'clock relative to the tapped end of the shaft and one at 3 o'clock. 3) Install the adapter stud into the shaft finger tight. 4) Install the mounting bracket with (1) 5⁄16 -18 × 1" lg filister head bolt, 5⁄16 lock washer and flat washer at the 12 o'clock position and (1) 5⁄16 -18 × 1" lg hex head bolt, 5⁄16 lock washer and flat washer at the 3 o'clock position. Do not tighten. 5) Place dual display monitor in position and align the shaft to the slot in the adapter. 6) Position the mounting plate and dual display monitor for proper alignment and install (4) 5⁄16 -18 × ½" lg hex head bolts and flat washers finger tight.
7) Tighten the bolts in the mounting bracket. 8) Tighten the bolts in the dual display monitor. 9) Tighten the jam nut.
Bulletin 1600-M Page 3
Made with FlippingBook flipbook maker