Bulletin 1615 Page 5
SELECTION
The following table provides a listing of those Series 1615 actuators currently available, along with an indication of the primary features offered by each.
Degrees of Zero & Span
Running Time (1) at 60 Hz (sec.)
Input Voltage
Feedback
Part
Torque (lb-in)
Number
(V ac)
Input Control
Signal
Travel
Adjustment
1615-A 1615-B 1615-C 1615-D 1615-E 1615-F 1615-G 1615-H 1615-I 1615-J 1615-K 1615-L 1615-M 1615-N 1615-P 1615-Q 1615-R 1615-S 1615-T 1615-V 1615-W 1615-X 1615-Y 1615-Z
140 140 140 200 200 310 310 310 310 310 400 400 400 140 200 200 200 140 140 200 310 310 400 400
18 25
110-120 110-120
4-20 mA 4-20 mA
None None 135Ω None
135° 90° 135° 90° 90° 135° 135° 135° 160° 135° 90° 135° 135° 90° 90° 135° 135° 90° 90° 90° 90° 90° 90° 135°
Yes Yes No Yes Yes Yes No Yes No Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes
37.5
24
(2)
25 25
110-120 110-120 110-120 110-120 110-120 110-120
4-20 mA 4-20 mA 4-20 mA
1000Ω
55.5 55.5 55.5
None 135Ω
(2) (3)
(4)
66
Floating 4-20 mA
None None
55.5
220-240 220-240
50 75 75 25 25
(3)
(4)
110-120 110-120
4-20 mA
None
(3)
(4)
220-240
4-20 mA
None
110-120 110-120 110-120 110/120
(3)
(4)
37.5 37.5
4-20 mA 4-20 mA
None
1000Ω
25
3 3 3 3 3 3 3
4 4 4 4 4 4 4
12
220/240 220/240
25 37 37 50 75
110/120
220/240
110/120 110/120
NOTES: (1) Multiply running time by 1.2 for 50 Hz. (2) Position proportional control (i.e. AC voltage control)
(3) All inputs/outputs, linearization, split ranging, and pre-set positioning, 4-20 mA, 0-10 vdc, 0-20 mA, and line voltage (4) Actuators with the multi-functional circuit board have the following output signals: 4-20 mA, 0-10 V dc, and 0-20 mA (5) Actuator shafts are 3/8 " square for 1615-A - L and 1615-N - R; 0.55" circular for a 1615-M. (6) All actuators will contain 2 limit switches and 4 auxiliary SPDT switches (7) All actuators will use the red scale indication with the double switch cam indicators.
ORDERING INSTRUCTIONS Examples:
1615-A Control Motor Actuators R410-7900 Bracket for retro-fitting to Honeywell MOD IV motor assembly
DIMENSIONS SHOWN ARE SUBJECT TO CHANGE. PLEASE OBTAIN CERTIFIED PRINTS FROM FIVES NORTH AMERICAN COMBUSITON, INC. IF SPACE LIMITATIONS OR OTHER CONSIDERATIONS MAKE EXACT DIMENSION(S) CRITICAL .
WARNING: Situations dangerous to personnel and property may exist with the operation and maintenance of any combustion equipment. The presence of fuels, oxidants, hot and cold combustion products, hot surfaces, electrical power in control and ignition circuits, etc., are inherent with any combustion application. Components in combustion systems may exceed 160°F (71°C) surface temperatures and present hot surface contact hazard. Fives North American Combustion, Inc. suggests the use of combustion systems that are in compliance with all Safety Codes, Standards, Regulations and Directives; and care in operation.
CONTACT fna.sales@fivesgroup.com T +1 800 626 3477 - F +1 216 373 4237
Fives North American Combustion, Inc. 4455 East 71st Street - Cleveland, OH 44105 - USA www.fivesgroup.com
Made with FlippingBook flipbook maker