Bulletin 1615 Page 5
SELECTION The following table provides a listing of those Series 1615 actuators currently available, along with an indication of the primary features offered by each.
Zero & Span Adjustment
Part Number
Torque (lb-in)
Running Time (1) at 60 Hz (sec.)
Input Voltage (V ac)
Feedback Signal
Degrees of Travel
Input Control
1615-A 1615-B 1615-C 1615-D 1615-E 1615-F 1615-G 1615-H 1615-I 1615-J 1615-K 1615-L 1615-M 1615-N 1615-P 1615-Q 1615-R 1615-S 1615-T 1615-U 1615-V 1615-W 1615-X 1615-Y 1615-Z
140 140 140 200 200 310 310 310 310 310 400 400 400 140 200 200 200 140 140 140 200 310 310 400 400
18 25
110-120 110-120
4-20 mA 4-20 mA
None None 135Ω None
135°
Yes Yes
90°
Obsolete
37.5
24
(2)
135°
No
25 25
110-120 110-120 110-120 110-120 110-120 110-120 220-240 220-240 110-120 110-120 220-240 110-120 110-120 110-120 110-120 220-240 110-120 220-240 110-120 220-240 110-120 110-120
4-20 mA 4-20 mA 4-20 mA
90° 90°
Yes Yes Yes
1000Ω
55.5 55.5 55.5
None 135Ω
135° 135° 135° 160° 135°
Obsolete
(2) (3)
No
(4)
Yes
66
Floating 4-20 mA
None None
No
55.5
Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes
50 75 75 25 25
(3)
(4)
90°
4-20 mA
None
135° 135°
(3)
(4)
4-20 mA
None
90° 90°
(3)
(4)
37.5 37.5
4-20 mA 4-20 mA
None
135° 135°
1000Ω
25 12 12 25 37 37 50 75
3 3
4 4
90° 90° 90° 90° 90° 90° 90°
4-20 mA
1000ohm
3 3 3 3 3
4 4 4 4 4
135°
NOTES: (1) Multiply running time by 1.2 for 50 Hz. (2) Position proportional control (i.e. AC voltage control) (3) All inputs/outputs, linearization, split ranging, and pre-set positioning, 4-20 mA, 0-10 vdc, 0-20 mA, and line voltage (4) Actuators with the multi-functional circuit board have the following output signals: 4-20 mA, 0-10 V dc, and 0-20 mA, *not 135 or 1000ohm (5) Actuator shafts are 3/8 " square for 1615-A - L and 1615-N - R; 0.55" circular for a 1615-M. (6) All actuators will contain 2 limit switches and 4 auxiliary SPDT switches (7) All actuators will use the red scale indication with the double switch cam indicators.
ORDERING INSTRUCTIONS Examples:
1615-A Control Motor Actuators R410-7900 Bracket for retro-fitting to Honeywell MOD IV motor assembly
DIMENSIONS SHOWN ARE SUBJECT TO CHANGE. PLEASE OBTAIN CERTIFIED PRINTS FROM FIVES NORTH AMERICAN COMBUSITON, INC. IF SPACE LIMITATIONS OR OTHER CONSIDERATIONS MAKE EXACT DIMENSION(S) CRITICAL .
WARNING: Situations dangerous to personnel and property may exist with the operation and maintenance of any combustion equipment. The presence of fuels, oxidants, hot and cold combustion products, hot surfaces, electrical power in control and ignition circuits, etc., are inherent with any combustion application. Components in combustion systems may exceed 160°F (71°C) surface temperatures and present hot surface contact hazard. Fives North American Combustion, Inc. suggests the use of combustion systems that are in compliance with all Safety Codes, Standards, Regulations and Directives; and care in operation.
CONTACT fna.sales@fivesgroup.com T +1 800 626 3477 - F +1 216 373 4237
Fives North American Combustion, Inc. 4455 East 71st Street - Cleveland, OH 44105 - USA www.fivesgroup.com
Made with FlippingBook flipbook maker