Ordering Information | 8480A Series
Bulletin 8480A page 5
The 8480A is configured to the application. The following information is required to enter a recuperator order:
Step #1
Specify Base Par
Step #2
Specify Series
600 = 6” (152mm) minimum tube ID 700 = 7” (178mm) minimum tube ID
Step #3
Specify Number of Heat
3 4
Exchange Sections
Step #4
Specify Exhaust Location
Left Bottom Right
Step #5
Specify Air Connection Type
3” NPT 3” ANSI/PN10 DIN80 Universal Flange
Step #6
Specify Exhause Connection Type
Direct Mount 4” FNPT 4” ANSI/PN10 DIN100 Universal Pattern Flange
Step #7
Specify Exhaust Spool Length
4” ANSI/PN10 DIN100 Universal Pattern Flange, 6” off-set 4” ANSI/PN10 DIN100 Universal Pattern Flange, 7” off-set 4” ANSI/PN10 DIN100 Universal Pattern Flange, 8” off-set 4” ANSI/PN10 DIN100 Universal Pattern Flange, 9” off-set 4” ANSI/PN10 DIN100 Universal Pattern Flange, 10” off-set
(if required)
WARNING: Situations dangerous to personnel and property may exist with the operation and maintenance of any combustion equipment. The presence of fuels, oxidants, hot and cold combustion products, hot surfaces, electrical power in control and ignition circuits, etc., are inherent with any combustion application. Components in combustion systems may exceed 160°F (71°C) surface temperatures and present hot surface contact hazard. Fives North American Combustion, Inc. suggests the use of combustion systems that are in compliance with all Safety Codes, Standards, Regulations and Directives; and care in operation.
CONTACT fna.sales@fivesgroup.com T +1 800 626 3477 - F +1 216 373 4237
Fives North American Combustion, Inc. 4455 East 71st Street - Cleveland, OH 44105 - USA www.fivesgroup.com
Made with FlippingBook flipbook maker