Ordering Information | Simplex Basket Strainers
8555B-
-
-
-
-
Pipe Size Code -02 = 3⁄8 "* -01 = ½ "* -0 = ¾ "* -1 = 1" -2 = 1 ¼ "* -3 = 1 ½ " -4 = 2" -5 = 2 ½ "
Body Material* -CI = Cast Iron -CS = Carbon Steel -SS = 316 Stainless Steel * See chart below for model/ material availability
End Connection -S = Screwed (NPT threaded) -F = Flanged (ANSI Class 125 FF* or ANSI Class 150 RF*)
-6 = 3 " -7 = 4" -8 = 6" -9 = 8"
*See chart below for Class 125/250 model/flange type availability
*Threaded only
B asket Selection -PERF = 1⁄16 Perf (3/8 - 4") and 1⁄8 Perf (5 - 8") - Cast Iron 1⁄16 Perf (all sizes) for Carbon and Stainless Steel with no Mesh Liner (100 SSU oil*) -20 = 20 Mesh screen (40 SSU oil*) -40 = 40 Mesh screen (steam, air, natural gas*) -100 = 100 Mesh screen (air, natural gas*)
Basket Material -SST = 304 SST (Fluids: Gas, Steam, Typical clean fuel oils) -316 = 316 SST (Fluids: fuels that require additional or aqueous corrosion resistance)
* Represents a general guideline for screen element sizes and should not be taken as absolute
8555B Simplex Strainer Threaded Body Material Selection Guide
Pressure/Tempera- ture Rating (PSIG / °F) (1)
Sizes Available with Bolted Cover
Material Selection Code
ANSI Class
Material Options
3⁄8 " - 3" 3⁄8 " - 3" 3⁄8 " - 3"
125 150 150
165/300°F 225/300°F 200/300°F
CI
Cast Iron
CS SS
Carbon Steel Stainless Steel
8555B Simplex Strainer Flanged Body Material Selection Guide
1" - 8" (FF) 1" - 8" (RF) 1" - 8" (RF) Sizes Available with Bolted Cover
Pressure/Tempera- ture Rating (PSIG / °F) (1)
Material Selection Code
ANSI Class
Material Options
CI
Cast Iron
125 150 150
165/300°F 225/300°F 200/300°F
CS SS
Carbon Steel Stainless Steel
1. Contact engineering if higher temperature ratings are required.
Bulletin 8555B Page 5
Made with FlippingBook flipbook maker