Sheet 8564-1 Page 2
Pumps for Heavy Oil (100-2500 SSU)
motor
GPM
Drip-proof designation
Totally Enclosed
Pipe size
psi
38 SSU 100 SSU 2500 SSU
hp
rpm
designation
1 ½
5.3
7
7.6
1200 1200 1200 1200 1200 1200 1800 1800 1800 1800 1200 1200 1200 1200 1200 1200 1200 1200 1200 1200 1200 1200 1200 1200 1200 1200 1200 1200
8564-5001
8564-5002
1"
1 ½ " 1 ½ "
12.2
14.5 20.5
16 22
3 3
5003 5005
5004 5006
17
100
7 ½ 7 ½
2 ½ " 2 ½ "
30 49 67
36 54 74
37 56 74
5007 5009
5008 5010 5012
15
5011
3"
½ 3 / ½
½ " ½ " ½ " ½ "
8564-6001
8564-6002
1.35
1.8 3.2 1.8 3.2
1.85
6004
2.8
3.5
6003 6005 6007
4
125
1.35
1.85
6006 6008
2.8
3.5
3 /
4
1 ½
4.9
6.9
7.6
8564-7001
8564-7002
1"
1 ½ " 1 ½ "
11.5
14.5 20.5
16 22
3 5
7003 7005
7004 7006
16
130
7 ½
2 ½ " 2 ½ "
29 47 64
36 54 74
37 56 74
7007 7009
7008 7010 7012
10 15
7011
3"
1 ½
4.7
6.8
7.6
8564-8001
8564-8002
1"
1 ½ " 1 ½ "
11
14.5 20.5
16 22
3 5
8003 8005
8004 8006
15.5
150
7 ½
2 ½ " 2 ½ "
28 46 62
36 54 74
37 54 74
8007 8009
8008 8010 8012
10 15
8011
3"
6.6
7.6
2 5 5
8564-9001
8564-9002
1"
1 ½ " 1 ½ "
14.5 20.5
16 22
9003 9005
9004 9006
200
7 ½
2 ½ " 2 ½ "
36 54 74
37 56 74
9007 9009
9008 9010 9012
15 15
9011
3"
The oil pump set price dœs not include the starter switch or heaters. See sheet 8564-3 for the starter switch and heaters selection chart, if these items are required. These parts must be listed separately on the order and will ship as loose items with the pump set. They are not mounted or wired to the pump set assembly.
Totally enclosed motors up to 1 1 /
2 hp may be either TEFC or TENV, depending on manufacturer. Larger sizes are TEFC.
Motor electrical specs of 8564-6001, -6002, -6003, and -6004 are 115-230/1/60. Maximum pressure for an oil less than 100 SSU is 150 psig.
Metric Conversions
1 gpm = 0.063 L/s 1 psi = 0.0703 kg/cm 2 = 703.1 mm H 2 O
WARNING: Situations dangerous to personnel and property may exist with the operation and maintenance of any combustion equipment. The presence of fuels, oxidants, hot and cold combustion products, hot surfaces, electrical power in control and ignition circuits, etc., are inherent with any combustion application. Components in combustion systems may exceed 160°F (71°C) surface temperatures and present hot surface contact hazard. Fives North American Combustion, Inc. suggests the use of combustion systems that are in compliance with all Safety Codes, Standards, Regulations and Directives; and care in operation.
CONTACT fna.sales@fivesgroup.com T +1 800 626 3477 - F +1 216 373 4237
Fives North American Combustion, Inc. 4455 East 71st Street - Cleveland, OH 44105 - USA www.fivesgroup.com
Made with FlippingBook flipbook maker