Tile Mounting Information | Tempest®
TILE AND MOUNTING OPTIONS
Tile Materials “A” Tile — Alumina/Mullite tile for fiber wall and most applications up to 3000°F (1649°C). Available with flanged "F" and "FL" mounting only.
"M" Tile — 310 SST metal tile for applications up to 1800°F (982°C). Available with flanged "F" style mounting. See Sheet 4441-1 for details on the 4441-M with metal tile.
All flanged mountings on sizes -1 to -7 are square, and round on all -8 burners
F = "Flanged" tile mounting have approximately 9" of tile length.
“Aardvark” Alloy Tile — The Aardvark’s threaded snout can be screwed directly into a fitting. Good for applications up to 1600°F (871°C). Consult North American for Aardvark tile option or see bulletin 4441A.
FL = "Flanged Longed" tile mounting have approximately 11" of tile length.
“R” Tile — Traditional square refractory block for applications to 3000°F (1649°C). Available with flanged "F" and "E" mounting and are recommended for installation in solid wall construction furnaces/kilns only. Available with either flanged or eared mounting, both with 9" long tiles.
Exit Shapes
“R” Round — for high penetration and maximum drive.
E — "Eared" Classic Tempest® flange- less 2-bolt mounting (available for -1 thru -7 "R" tile only). The two mounting slots are in the same locations as the 3 & 9 o'clock slots in the "F" style flange.
“S” Slotted — for narrow lane firing and better temperature uniformity (available with “A” tile only).
‡ Slot orientation is field adjustable, by loosening body mounting bolts and rotating exit accordingly.
Slot orientation - horizontal with respect to burner air connection at 4:30‡, unless otherwise specified on order.
“J” Tile — Traditional square refractory block with 11 ga. 309 SST metal jacket and "F" style flanged mounting for applications to 1800°F (982°C). Note: Recommended for installation of a square refractory block tile in soft wall.
Bulletin 4441 page 15
Made with FlippingBook flipbook maker