4441 LNI Optional Part | Tempest®
Bulletin 4441 LNI Page 10
FURNACE MOUNTING GASKETS
RECOMMENDED SPARE PARTS
Fiberglass "bolt hole tape" is an excellent way to make a furnace gasket. These gaskets will withstand continuous exposure to temperatures of 1000°F (540°C), and are highly flexible and conformable. To estimate the length of material, find the length of the flange profile and add 2" (50mm). (See burner dimension pages) For 4441 flanges Fives North American recommends part num- ber: R290-1310 1⁄8 " x 1 ½ " Bolt hole tape fiberglass, order in 1 foot increments.
Fives North American stocks most 4441 parts, but it is a good idea to stock parts critical to an operation locally.
These parts are recommended to keep as spare parts: — Igniters — Flame rods — Ignition cables — Gaskets (especially when burners are taken apart) — Observation ports — Petcock valves — Burner tiles (especially when refractory work is done)
WARNING: Situations dangerous to personnel and property may exist with the operation and maintenance of any combustion equipment. The presence of fuels, oxidants, hot and cold combustion products, hot surfaces, electrical power in control and ignition circuits, etc., are inherent with any combustion application. Components in combustion systems may exceed 160°F (71°C) surface temperatures and present hot surface contact hazard. Fives North American Combustion, Inc. suggests the use of combustion systems that are in compliance with all Safety Codes, Standards, Regulations and Directives; and care in operation.
CONTACT fna.sales@fivesgroup.com T +1 800 626 3477 - F +1 216 373 4237
Fives North American Combustion, Inc. 4455 East 71st Street - Cleveland, OH 44105 - USA www.fivesgroup.com
Made with FlippingBook flipbook maker