Parts List | 4445-2 thru -4-B Legacy Tempest®
Flame Rod Assembly†
A
A
Spark Igniter Assembly†
1⁄8 " Pipe Plug (2 req'd)
Burner Mounting Gasket (included with burner) 4-24724-1
¼ " Pipe Plug
Main Air Flange Gasket (2 req'd) 4-5371-1
Air Orifice Plate
Tru-Seal Locknut R790-0120
Tile and Mounting Tube Assembly
Main Air Flange
8790-0 Obs. Port (2 req'd)
Stabilizer Assembly
Gas Connection Reducing Tee 4-25182-1
Flame Rod Assembly†
Gas Tube
Burner Mounting Flange 4-21985-1
Burner Body 4-22934-1
Body Gasket 4-25638-1
Locking Set Screw (2 req'd) R776-2545-CO
† When replacing igniter and/or flame rod assemblies in the field, it is recommended that the burner body be removed from the tile mounting tube flange to ensure insertion into the access holes provided and not into one of the air tubes on either side.
Burner designation
Part name
4445-2
4445-3
4445-4-A 4-1695-10 4-22933-4 4-25292-4
4445-4-B 4-1695-10 4-22933-5 4-25929-5
Main Air Flange Air Orifice Plate
OA4-0433-1 4-22933-2 4-25292-2
4-1695-1 4-22933-3 4-25292-3
Stabilizer Assembly (all models)
Spark Igniter Assembly "S" Model
4-24752-1 4-24752-2 4-24752-3 4-24752-4 4-24745-1 4-24745-2 4-24745-3 4-24745-4
"M" Model "L" Model "E" Model
Flame Rod Assembly "S" Model
"M" Model "L" Model "E" Model
Legacy 4445 burners can use the same updated tile replacement parts designed for the 4445N. The updated mounting tube uses a mounting system that makes it easier to replace the ceramic tiles. The 4445 and 4445N use the same ceramic tile. See the 4445N part list on page 11 for the tile part numbers. Note: 4445 and 4445N Igniter and flame rods are not compatible with each other.
Bulletin 4445/4445N Page 11
Made with FlippingBook flipbook maker