Igniters & Flame Rods | 4445 & 4445N-5 & -6 Tempest ®
IGNITERS AND FLAME RODS FOR -5 AND -6 BURNERS WITH A 90° AIR INLET
14 X 1.25 mm
Stablizer support insulator
Ø .315 (8)
3.54 (90)
X
L
Note: On the 4445-5 and -6 both igniters and flame rods are made with the same electrode with a 14mm mounting thread. While the flame rod can also function as an igniter, the igniter is not long enough to be used as a flame rod.
IGNITERS
4445N-5 and -6
Igniter
"L" Dimensions
"X" Dimensions
Model Length Designation
Part Number
Inches (mm) 19.81 (249) 17.81 (452) 27.81 (706) 37.81 (960)
Inches (mm)
Short - "S"
4-40118-1 4-40118-2 4-40118-3 4-40118-4
Medium - "M"
Igniter
.38 (9.6)
Long - "L"
Extra Long - "E"
FLAME RODS
4445N-5 and -6
Flame Rod
"L" Dimensions
"X" Dimensions
Model Length Designation
Part Number
Inches (mm) 12.00 (305) 20.00 (508) 30.00 (762) 40.00 (1016)
Inches (mm)
Flame Rod
Short - "S"
4-40118-11 4-40118-12 4-40118-13 4-40118-14
Medium - "M"
2.56 (65)
Long - "L"
Extra Long - "E"
4445-2 thru -4-B Burners Tempest ® IGNITERS FOR -2, -3, -4-A AND -4-B BURNERS WITH A 45° AIR INLET
IGNITERS
Ø 0.25 (6.4)
14 X 1.25 mm
Stablizer support insulator
^Shrink Tube
.38 (9.6)
L
4445-2 thru -4-B
Spark Igniter Part Number
"L" Dimensions
^ Old igniters have shrink tubing. New igniters have ceramic coupling
Model Length Designation
Inches (mm) 7.63 (194) 16.00 (406) 26.00 (660) 36.00 (914)
Short - "S"
4-24752-1 4-24752-2 4-24752-3 4-24752-4
* Very long igniters may be made using 2 pieces of insulating ceramic tube.
Medium - "M"
Long - "L"
Extra Long - "E"
Bulletin 4445/4445N Page 13
Made with FlippingBook flipbook maker