Dimensions & Parts List 4465-1 Page 2
4465 SERIES SPARE PARTS
1⁄8 " NPT MAIN AIR PRESSURE TAP R590-7810-C AIR FLANGE BOLTS AND WASHERS
LIMITING ORIFICE GAS CARTRIDGE 4-6063-01
4465 "Long" Model (for 11 ½ " Insertion Depth)
AIR FLANGE
BACKPLATE
AIR FLANGE GASKET 4-5371-1
BODY
GAS
TRU-SEAL LOCKNUT
3⁄8 " NPT GAS PRESSURE TAP (WITH 8790-02 OBSERVA- TION PORT INSTALLED, -0 SIZE ONLY)
TILE
F.S.
IGN.
1⁄8 " PIPE PLUG R590-7810-C
FLAME ROD ASSEMBLY (OPT) 4-27130-1 *
IGNITER ASSEMBLY 4-27130-1
OBS
STABILIZER
GAS TUBE TILE RETAINING PLATE
8790-02 3⁄8 " OBSERVATION PORT
1⁄8 " NPT DOWNSTREAM AIR PRESSURE TAP R590-7813-C
#10-24 GROUND SCREW LUG R774-5461-C
POSITIONING RING 4-26574-1
FLAT HD. SCREWS (4 REQ'D) R773-2030-C
PACKING [(2) 12" LONG PIECES REQ'D.] R540-0305
INTERNAL GASKET RING 4-28044-1
BURNER INTERNALS-TO-BODY BOLTS, NUTS, AND WASHERS
SQUARE GASKET 4-26576-1
SQUARE GASKET 4-26576-1
4465 "Short" Model (for 9" Insertion Depth)
MOUNTING BOX ADAPTER ASSEMBLY 4-27097-1
GAS
F.S.
IGN.
NOTE: INCLUDES ALL OF THE ABOVE PARTS FOR THE -0 AND -1 "LONG VER- SION" PLUS THE EXTRA PARTS LISTED HERE.
OBS
BOLTS: 5⁄16 -18 × 1" (4 REQ'D) R066-2640-C WASHERS: 5⁄16 " SÆ (4 REQ'D) R970-7255-C
Burner designation
Burner designation
Part Name
4465-0
4465-1
Part Name
4465-0
4465-1
Body and Tile Assembly "M" Model
Burner Internals (continued) ¼ " Slotted Pipe Plug (opt.) * ¼ " Tru-Seal Fitting (opt.) *
4-27093-1 4-27093-2 4-28768-1 4-28766-1 4-26572-1 4-26575-1 4-27092-1 4-27872-1 4-26571-1 4-27129-1 4-27090-1 R790-0120 4-27843-1 4-27130-1
4-27093-1 4-27093-2 4-28768-1 4-28766-1 4-26572-1 4-26575-1 4-27092-2 4-27872-2 4-28357-1 4-27129-2 4-27090-1 R790-0120 4-28358-1 4-27130-1
R590-7825-C
R590-7825-C
"H" Model
R790-0110 4-27873-3
R790-0110 4-27873-2
"M" Tile only "H" Tile only
Main Air Flange
Main Air Flange Bolts ¼ -20 × 1" (4 req'd.)
Body only
R066-2350-C
R066-2350-C
Tile Retaining Plate
Main Air Flange Bolt Washers ¼ " SÆ (4 req'd.) Burner Internals-to-Body Bolts: 5⁄16 -18 × 1 ½ " (4 req'd.) Nuts: 5⁄16 -18 NC (4 req'd.) Washers: 5⁄16 " SÆ (8 req'd.)
R970-7225-C
R970-7225-C
Burner Internals Assembly With Flame Rod
R066-2670-C R510-2219-C R970-7255-C
R066-2670-C R510-2219-C R970-7255-C
Without Flame Rod
Backplate
Gas Tube Assembly
Gas Tube
* ¼ " Slotted Pipe Plug (R590-7820-C) and ¼ " Tru-Seal Fitting (R790-0110) furnished if Flame Rod ("R" version) not ordered. NOTE: If UV flame supervision is desired, a special UV adapter is required (PN 4-27091-1) and must be ordered separately.
Tru-Seal Fitting
Stabilizer
Flame Rod Assembly (opt.) *
WARNING: Situations dangerous to personnel and property may exist with the operation and maintenance of any combustion equipment. The presence of fuels, oxidants, hot and cold combustion products, hot surfaces, electrical power in control and ignition circuits, etc., are inherent with any combustion application. Components in combustion systems may exceed 160°F (71°C) surface temperatures and present hot surface contact hazard. Fives North American Combustion, Inc. suggests the use of combustion systems that are in compliance with all Safety Codes, Standards, Regulations and Directives; and care in operation.
CONTACT fna.sales@fivesgroup.com T +1 800 626 3477 - F +1 216 373 4237
Fives North American Combustion, Inc. 4455 East 71st Street - Cleveland, OH 44105 - USA www.fivesgroup.com
Made with FlippingBook flipbook maker