Dimensions 4514 Page 2
A square threaded flange is used for sizes -6, -7, -8. SW style (suitable for slip-on or welded connection) inlet may be ordered as a special option. An SW inlet is standard for -9 and -10 burners. Opening in furnace shell or outer wall must be ½ " larger than dimension "AA" to allow for mounting plate fillet and draft. Blank boss (for optional uses with oil and dual-fuel models). Applies when optional SW inlet is specified. Flanged connection -- ANSI 125 psi threaded flange. 1" fpt for electrode or UV flame detector. ANSI or SW flanges: Flat face companion flanges and full gaskets are supplied with this equipment. Do not use raised face flanges that may damage mating flange.
ORDERING INFORMATION
4514 -
_ _ _
/ _ _
/ _ _ _ _
Product Size Connection 6 ................. 3" 7.................. 4" 8-A ........... 6" 8-B ............ 6" 9 ................. 8" 10 ...............10"
Tile
Burner Nose
Capacity
Material
BO.... burner only LX..... refractory tile (no jacket) LC ..... steel tile jacket L4..... 304 stainless jacket L9..... 309 stainless jacket
1.0......main air capacity 1.1 .......1.1 x main air capacity 1.2 ......1.2 x main air capacity 1.3 ......1.3 x main air capacity
H ....cast iron
A ....alloy
Example 1 4514-8-A/LC/1.2A Fireall gas burner complete with carbon steel jacketed tile and 1.2 capacity alloy nose Example 2 4514-6/BO/1.0H Fireall gas burner only with standard capacity iron nose Example 3 4514-9/LX/1.2H Fireall gas burner complete with refractory tile and 1.2 capacity iron nose Note: See Supplement 6514-6 for cross referencing old product numbers.
WARNING: Situations dangerous to personnel and property may exist with the operation and maintenance of any combustion equipment. The presence of fuels, oxidants, hot and cold combustion products, hot surfaces, electrical power in control and ignition circuits, etc., are inherent with any combustion application. Components in combustion systems may exceed 160°F (71°C) surface temperatures and present hot surface contact hazard. Fives North American Combustion, Inc. suggests the use of combustion systems that are in compliance with all Safety Codes, Standards, Regulations and Directives; and care in operation.
CONTACT fna.sales@fivesgroup.com T +1 800 626 3477 - F +1 216 373 4237
Fives North American Combustion, Inc. 4455 East 71st Street - Cleveland, OH 44105 - USA www.fivesgroup.com
Made with FlippingBook flipbook maker