Designators | Magna-Flame ™ Burner
Bulletin 4795 Page 4
main air conn.
Pilot position designators‡ are
Arrangement Designators are specified relative to the main air connection at 12 o'clock and should be listed for pilot, gas connection, and flame detector in that order.
Gas connection position designators are
Flame detector designators‡ are (must be 90, 135, or 180° from pilot)
view from outside furnace
‡ Good practice dictates that neither pilot nor flame detector be below the centerline of a horizontally-mounted burner. ORDER MUST SPECIFY: (1) Burner designation (such as 4795-14): (2) Arrangement designation for pilot, gas connection and flame safety positions in that order such as: 4795-14, arrangement 3a1 (for the arrangement shown above).
WARNING: Situations dangerous to personnel and property may exist with the operation and maintenance of any combustion equipment. The presence of fuels, oxidants, hot and cold combustion products, hot surfaces, electrical power in control and ignition circuits, etc., are inherent with any combustion application. Components in combustion systems may exceed 160°F (71°C) surface temperatures and present hot surface contact hazard. Fives North American Combustion, Inc. suggests the use of combustion systems that are in compliance with all Safety Codes, Standards, Regulations and Directives; and care in operation.
CONTACT fna.sales@fivesgroup.com T +1 800 626 3477 - F +1 216 373 4237
Fives North American Combustion, Inc. 4455 East 71st Street - Cleveland, OH 44105 - USA www.fivesgroup.com
Made with FlippingBook flipbook maker