Parts List 4825-1 Page 2
SERIES 4825 GAS BURNERS FOR FIBER WALL CONSTRUCTION
¾ " ¾ " ½ " Pipe Tee -8-A Burner Only
Burner Tile
½ " NPT Connection Gas Tube Body and Liner Assembly Gas Connection
-5
Mounting Plate Adapter
Observation Port
Air Tubes (8)
Gas Connection Studs (4)
Typical Gas Tube End for -2, -3, -4, -6, -7-A and -7-B Burners (-6 shown)
Jet Air Tube
Backplate Backplate Gasket Gas Connection Gasket
Air Disc Assembly
Mounting Plate Gasket
-8-A
End of gas Tube must be flush mounted with end of Air Disc Assembly
Burner designation
Part Number
4825-2-Z 3-6401-1 3-6283-1 3-3643-1 4-2459-2 3-2607-1 3-6511-3
4825-3-Z 3-6401-1 3-6283-2 3-3643-2 4-2459-2 3-2607-1 3-6511-3 3-6520-1 3-2465-4 3-2473-1 4-8100-5 4-7870-3 3-6523-1 3-6516-1 8790-0 3-2584-1
4825-4-Z 4825-5-Z
4825-6-Z 4825-7-AZ 4825-7-BZ 4825-8-AZ
Adapter
3-6401-1 3-6283-3 3-3640-2 4-2459-2 3-2607-1 3-6511-3 3-6520-1 3-2465-5 3-2473-1 4-8100-6 4-7871-2 3-6523-1 3-6516-1 8790-0 3-2584-1
3-6401-2 3-6283-4 3-3639-2 4-2459-2 3-2607-1 3-6511-3 3-6520-1 3-2465-6 3-2473-1 4-8100-7 4-7870-4 3-6523-1 3-6516-1 8790-0 3-2584-1
3-6401-2 3-6283-5 3-3554-2 4-2459-2 3-2607-1 3-6511-3 3-6520-3 3-2465-6 3-2473-1 4-8100-8 4-7897-2 3-6523-1 3-6516-1 8790-0 3-2584-1
3-6467-1 3-6283-6 3-3273-3 3-3269-3 3-3272-1 3-6480-1 3-6520-3 3-6510-1 3-3272-1 4-7960-1 4-7992-2 3-6525-1 3-6483-1 8790-0 3-3325-1
3-6467-1 3-6283-7 3-3273-4 3-3269-3 3-3272-1 3-6480-1 3-6521-1 3-6510-1 3-3272-1 4-7960-1 4-7963-2 3-6525-1 3-6483-1 8790-0 3-3325-1
3-6467-1 3-6283-8 4-3684-2 4-7983-1 3-3272-1 3-6480-1 3-6521-1 3-6510-1 3-3272-1 4-7980-1 4-8034-2 3-6525-1 3-6483-1 8790-0 3-3325-1
Air Disc Assembly Air Tubes (8 req'd.)
Backplate
Backplate Gasket
Body and Liner Assembly
Burner Tile
3-6521-1
Gas Connection
3-2465-4 3-2473-1 4-8100-5
Gas Connection Gasket
Gas Tube Jet Air Tube 4-7986-2
Mounting Plate
3-6523-1 3-6516-1 8790-0 3-2584-1
Mounting Plate Gasket
Observation Port
Studs, Gas Conn. (4 req'd.)
WARNING: Situations dangerous to personnel and property may exist with the operation and maintenance of any combustion equipment. The presence of fuels, oxidants, hot and cold combustion products, hot surfaces, electrical power in control and ignition circuits, etc., are inherent with any combustion application. Components in combustion systems may exceed 160°F (71°C) surface temperatures and present hot surface contact hazard. Fives North American Combustion, Inc. suggests the use of combustion systems that are in compliance with all Safety Codes, Standards, Regulations and Directives; and care in operation.
CONTACT fna.sales@fivesgroup.com T +1 800 626 3477 - F +1 216 373 4237
Fives North American Combustion, Inc. 4455 East 71st Street - Cleveland, OH 44105 - USA www.fivesgroup.com
Made with FlippingBook flipbook maker