Dimensions 4832 Page 2
¾ NPT–3 holes for Pilot, Flame Detector†, and Observation Port
ROUND MOUNTING AND TILES 4832- -RG and 4832D- -RG
11 ½ BC
Round tiles and mountings are available at no extra cost. Tiles are 13 3⁄8 " diameter and 9" or 13" deep. They are made of the same refractory as standard square 4832 tiles. Round mountings fit standard 4832 Burner bodies.
13 ¼ dia. mounting
4 anchor holes ½ " dia.
Mounting Dimensions
FIBER LINED FURNACE DESIGNS (FLANGED FABRICATED MOUNTING)
For fiber lined furnaces, 4832 Burners are available with either square or round mountings and tiles. All but 2" of burner tile is encased in an ex- panded metal jacket. Tile must be installed so jacket dœs not exceed 1800 F--refer to Supplement DF-M2 for installation information. Since tile face must be flush with inside face of furnace wall, mounting flange location on jacket must be specified. "Z" dimensions are available from 2" to 15 ½ ", in ½ " increments.
Dotted view applies to "Z" dimension between 13 ½ " and 15 ½ ". Special "inverted" mounting provided.
5⁄8 dia.–8 holes
83⁄8
83⁄8
2
141⁄8 sq.
83⁄8
Square 4832- -SZ (9" Tile) 4832D- -SZ (13" Tile)
13 ½
sq.
83⁄8
¾
" Z " dim. 2 min.
9
3⁄8
18 sq.
M (see table, page 1)
DIMENSIONS inches
22 ½ °
2
18 OD
Round 4832- -RZ (9" Tile) 4832D- -RZ (13" Tile)
14 OD
13 3⁄8 dia.
¾
16 ¾ dia. BC
" Z " dim. 2 min.
3⁄8
5⁄8 dia.–8 holes equally spaced
M (see table, page 1)
9" deep tile supplied for "Z" (2"-9"). 13" deep tile supplied for "Z" ( 9 ½ "-15 ½ ").
Made with FlippingBook flipbook maker